SKU: 46161026305
display e bike

display e bike EBMX X-9000 3.5" Full color display – REVRides

$23.15 $25.72
Save 10%
No.2 Bestseller on www.kerrimatt.com >

Pay in installments of $6.43 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

display e bike EBMX X-9000 3.5" Full color display – REVRidesEBMX 3. 5" TFT Enhanced Display By EBMX For X9000 V2 & V3 Controllers EBMX Enhanced Display for X9000 Controllers Available at REV Rides If youre running an EBMX X9000 and want real time insight into what your bike is doing, this is the upgrade that completes the system. The EBMX 3. 5" TFT Enhanced Display was built specifically for the X9000 platform, giving you instant visibility of motor temp, controller temp, ride data, and system performance

EBMX 3.5" TFT Enhanced Display | By EBMX | For X9000 V2 & V3 Controllers

EBMX Enhanced Display for X9000 Controllers – Available at REV Rides

If you’re running an EBMX X9000 and want real-time insight into what your bike is doing, this is the upgrade that completes the system. The EBMX 3.5" TFT Enhanced Display was built specifically for the X9000 platform, giving you instant visibility of motor temp, controller temp, ride data, and system performance through the all-new EBMX UI.

At REV Rides, we always tell riders the same thing, power is nothing without control. This display gives you both. Whether you’re pushing hard enduro, tuning for race day, or just dialing in your daily ride, you’ll know exactly what your setup is doing.

Purchase a CNC Case for it Here

Important Compatibility Note

• V2 version works with X9000 V2 controllers.
• V3 version available for X9000 V3 controllers.
• Not compatible with X9000 V1 controllers (2024 and earlier).
• Not compatible with other controller brands.
• Not plug and play for Ultra Bee R models with indicators or headlights.
    (Drop In Mount for Ultra Bee Purchase seperately)

Key Features

Base Kit Includes:

  • 3.5" TFT full color display
  • All-new EBMX UI with ride data
  • CNC mounts for MTB and Moto bars, 31.8mm and 28.6mm
  • New CANbus 2-1 cable included
  • New mode button included
  • Display to button cable length: 350mm
  • Display to CANbus connector length: 250mm
  • IP67 waterproof rating
  • No setup required, 830 and above firmware required

The included billet aluminum single center post mount allows flexible positioning across different stems and bar setups. With the provided shims, you can mount cleanly to both MTB 31.8mm bars and Moto 28.6mm bars.

Available to purchase separately:

Performance & Data Monitoring

The display communicates through high-speed CAN bus technology, delivering fast and accurate real-time data. You can monitor:

  • Motor temperature
  • Controller temperature
  • Ride data and system feedback
  • Mode changes through the included button

For riders pushing higher voltage setups, upgraded motors, or aggressive tune profiles, temperature monitoring is critical. This display keeps you informed so you can ride harder with confidence.

Built to Handle Real Riding

This is not a plastic bicycle display. The CNC aluminum bar clamps and billet mounting hardware are built for off-road and on-road abuse. EBMX components are engineered for high-performance builds, featuring fully waterproof IP67-rated connectors and durable construction designed to survive serious riding.

CNC display cases are available separately in Purple, Red, Black, and Blue. A Drop-In Mount for the Ultra Bee is also available separately.

Why This Display Stands Out

What makes this display different is integration and simplicity. It is designed specifically for the X9000 ecosystem, meaning no complicated setup, no guesswork, just plug it in and ride when running firmware 830 or newer. The upgraded EBMX UI gives a clean, performance-focused interface that matches the capability of the controller.

If you’re already investing in an X9000 build, this display is the missing piece that gives you full control and visibility of your system.

Best For

  • High-performance X9000 builds running upgraded batteries and motors
  • Hard enduro and aggressive trail riders monitoring temps
  • Riders who want a clean, professional cockpit setup with full data visibility

If you’re building it right, finish it right. The EBMX 3.5" TFT Enhanced Display brings pro-level monitoring and clean integration to your X9000 setup.

Videos for your EBMX controller

REV Rides' Detailed EBMX X9000 Installation Video with Tips & Tricks:

EBMX uses components sourced from reputable suppliers. Every part has been engineered for maximum performance. From the CNC machined internals, bus bars, and injection molded cover, to the fully waterproof construction.

Whether you are trying to nail a wheelie, riding hard enduro, competing in a race series, commuting to work, or just cruising the trails with your family – the X-9000 is built to give you ultimate freedom and control.

EBMX Mobile Application Overview

  • Custom EBMX App for tuning and full control (Available free in the App Store and Google Play Store)
    • Multiple power modes and full adjustment in each mode
    • Adjustable speed limits for different ride modes
    • Customizable dashboard to set the display up how you want
  • Built-in and programmable DC/DC Converter with 4 programmable 12v outputs for running a coolant pump, headlights, and other 12v accessories as required and controllable through the app.
  • Air-cooled heatsink as standard (comes in black, blue, red, gold or purple).
  • Wiring harness connections are fully sealed and come straight out of the controller with fully waterproof IP67-rated connectors for the harnesses.
  • Direct bolt-in for the Sur Ron Light Bee and Talaria Sting bikes with no extra brackets needed, no phase wire extensions or other additional parts (harness adapter included).
    • Integration with both Sur Ron hall-based motors and Talaria encoder motors
  • SW102 (EggRider) Display included and custom firmware to allow monitoring of motor temp, controller temp along with all of the regular display info.
  • Can be setup with a smart phone for the display or to check info as desired
  • Super heavy-duty construction internally and externally to sustain hard riding and high-powered batteries and motors.
    EBMX X-9000 V2 Install Video on E Ride Pro SS  by Logan Taylor



      Official EBMX Application Setup video

      Talaria MX3 / MX4 Sting R App setup

      Talaria XXX EBMX Official Installation video



      Shipping Notes
      • Free Standard Shipping on $100+ Orders to the USA.
      • Except Preorder products are shipped in 48 hours.
      • Delivery to the USA:
      1. Standard Shipping : 3-10 business days
      • If time is of the essence, please consider selecting expedited delivery for faster service.
      Exchange/Return Notes
      • We offer a 30-day return/exchange service after receiving.
      • Final sale items are not eligible for returns or exchanges.
      • To process your return/exchange, please contact us at [email protected]
      • Please click here for more details>>> Return & Exchange Policy
      SKU: 46161026305

      Discover Niche Categories That Outsell display e bike

      Top-Converting Item to Boost Your Average Order

      4.0 ★★★★★
      Based on 11 reviews
      Sort
      Highest Rating
      Newest First
      Oldest First
      Product Reviews
      R
      Verified Purchase
      R. Cordosi
      Chelsea, US
      ★★★★★ 5
      Outstanding Frother!
      Color: Space Gray
      Exceptional! This frother is in another league compared to the cheapo push button frothers. The motor is smooth, quiet and powerful. This has an intuitive thumb dial on top that operates smoothly with a wide range of smooth speed adjustment. It’s gentle enough to froth a little bit of milk for a macchiato and powerful enough to scramble 3 eggs. The head is removable for easy cleaning. It’s also rechargeable. I charged this the day I bought it on April first. I use it at least twice a day. It’s September 26th today and I have yet to recharge it and it’s not showing any signs of needing a charge. One minor quibble is that they give you 2 of the same frother heads. They are built so well, that I don’t imagine it ever wearing out. It would have been nice to get a whisk or something different. Not a deal breaker at all though.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on September 26, 2025
      B
      Verified Purchase
      banjo player
      Whiting, US
      ★★★★★ 5
      Solid unit
      Color: Black
      Handheld Mixer/Frother Review A Premium Choice That Transforms Morning Coffee I am thoroughly impressed with this handheld mixer and frother. Each morning, I blend cacao and collagen powder into my coffee, and in the past, I always ended up with stubborn lumps using only a spoon or whisk. I had previously purchased a few inexpensive handheld mixers, but they disappointed me both in price and performance, struggling to mix the powders thoroughly—especially at the bottom of the cup. I came close to abandoning handheld mixers altogether, but decided to give it one last try. After reading countless reviews and carefully comparing models, I opted to invest in a higher-end handheld mixer. The anticipation was high—would this mixer truly distinguish itself from the budget options cluttering my kitchen drawer? From the moment I unboxed it, the difference was clear. The mixer felt substantial in my hand, and the build quality reflected thoughtful engineering. While this model cost roughly twice as much as the cheaper alternatives, it proved to be well worth the investment. Initially, I was concerned about the dial at the top, fearing it might be difficult to control. However, I was pleasantly surprised by its intuitive operation. The unit offers a solid feel, plenty of power, and a versatile range of speeds—from a gentle stir perfect for coffee to an impressively fast setting. I had not previously considered using this mixer as a frother, but as a cappuccino enthusiast, I decided to give it a try. I heated both 2% milk and oat milk to take the chill off, then submerged the mixing wand. Allowing the mixer to rise above the milk introduced air and created a rich, creamy foam—an unbelievable result. My homemade cappuccino now tastes like something from a café. The controls are robust, the construction is reliable, and the power is consistent. Cleanup is effortless, requiring only a quick rinse under the tap. The battery life is also noteworthy, lasting through several uses without losing strength. If you are hesitant to spend a bit more on a quality handheld mixer, I wholeheartedly recommend making the investment. This mixer has become an essential part of my morning routine. Excellent product—well done!
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on August 13, 2025
      P
      Verified Purchase
      Philip B. Corriveau
      Alexandria, US
      ★★★★★ 5
      Solid, powerful, rechargeable
      Color: Black
      Very impressed with its weight, speed and performance. The dial is great
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 29, 2026
      C
      Verified Purchase
      Chief
      Fort Morgan, US
      ★★★★★ 4
      Very nearly the perfect frother for all your basic frothing & mixing needs
      Color: Black
      There are a lot of middle-of-the-road frothers out there. I've been through a few of them in my recent search for something that could mix and froth well, without taking up any more outlets in my basement kitchen. Of the three Maestri frothers I've tried so far, this one wins the race by a nose. Most recently, these Maestri frothers come in basically three versions: A single-speed @ 8000 RPM, a two-speed @8000/5500 RPM, and this stepless variable-speed version. Aside from that, the only real difference in recent version pack-outs is which attachments they come with. Look over the reviews of the single-speed version and you'll find that while it can and does froth well, it starts at a single, high speed and gets there fast. This makes it pretty easy to spin liquid right out of most common cups and mugs. There is a two-speed version, but it's harder to find, only comes in one color (Grape Purple), and while it's much better than the Maestri single-speed, it still has a couple of quirks that make this variable-speed version win out. This mixes and froths whole milk, half-and-half, or heavy whipping cream, or just about anything else very well. Like all frothers, it takes a little time to learn its nuances and nail down the technique, this will definitely get you there. The best feature of this is easily the speed control. Turn the knob to turn it on at a low speed that's great to get things started, then turn the knob to crank up the speed just enough to do what you need, whether that's mixing or frothing. The low starting speed makes it easy to keep things under control without undue spilling, and the max speed is more than enough to make quick work of getting your froth on. There are really only two complaints I have with this stepless, variable speed version: - I'd really like to have a Press On / Release Off button in addition to the Speed Control knob. More than one time have I gone to turn this off, only to spin the knob the wrong way and crank the speed up to ludicrous, sloshing liquid on the counter. Being able to turn it Off just by letting go of the button would be quick and easy. This configuration would allow using a preferred speed right from the start, while still allowing speed to be adjusted on-the-fly when needed. - Give it a bigger battery. It would cost mere pennies to give this a 2000mAH+ instead of a 1200mAH battery, and I can't think of any reasonable downside to that. - Give the motor a little more torque. It's fairly easy for the current motor, at any speed, to get bogged down in a thick protein powder mix, or when pressing the frother or other attachment a bit too hard into the bottom or side of the frothing container. A bit more "oomph" would prevent that. I really like the overall design and features of thes Maestri frothers better than many other, cheaper versions. This variable-speed version is pretty great as it is and probably the one I would recommend over the single- or two-speed, for most people. But I often find myself using two hands -- one to hold it steady, and the other to turn it on and tweak the knob to the desired speed(s) -- for a device that should arguably need only one hand to use. Just a couple of minor tweaks as noted above would make this the overall best frother of its type that I've used.
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on May 23, 2025
      D
      Verified Purchase
      D. Smith
      Phoenix, US
      ★★★★★ 5
      Hands down, the BEST handheld frother I've ever used!
      Color: Black
      Hands down, the BEST handheld frother I've ever used! I got the black one, but any color will have the same results. Over the past 12 years or so, I've used so many different handheld frothers and they've ALL fallen short of expectations for quality, longevity, power, features, and usability. I've used everything from cheap, $15 models to $50+ models and everything in-between. Some with fancy attachments for various types of mixing, frothing, beating, whipping, etc. Some with rechargeable batteries, some without. Some AC powered, some with fixed whisks, some with detachable/replaceable whisks, some with stands, etc. NONE have been spectacular. Most broke within 6 months and got tossed. ALL were major disappointments in the end, including the "revered" Zulay models of which I tried several. I finally found this Maestri House branded, variable speed frother with detachable / replaceable whisks and got one to try. I was literally on Cloud Nine the first time I turned it on. Like, WOW! Not only was it FAST on the highest speed, but it was powerful enough to churn right through milk, eggs, cream, etc, without bogging down like many others. This thing makes milk froth like a milkshake and Matcha Lattes like nothing else I've ever experienced. I used to have to sift my Matcha, then whisk it in hot water, then froth milk and then blend them together to make the perfect latte. and if the milk was cold (my preference), pre-whisking in hot water was a must to avoid lumps. However, with THIS frother? I literally pour my milk into a tall tumbler, drop in un-sifted Matcha powder, and spin up the Maestri House frother at first on a medium low speed to get it mixed, then jump straight to the highest speed to really whip that milk and match up. After about 30-45 seconds, I've got the thickest, richest, smoothest, most aerated latte around. And NO LUMPS at all!!! What a time and dish saver! And cleaning? I just run it under hot running water to get the shaft cleaned and then spin it up in a dish with hot running water for a few moments, then spin it on high for a few seconds in the air to dry it off instantly. Now, I'll be honest here, too. The specs say it can go months on a charge, using it for a couple minutes a couple times daily. Well, I guess it could do that and still spin. But I use it FULL SPEED, churning hard for at least a minute a couple times per day. After about 2 weeks, I can start to notice a speed reduction so I just plug it back in on the charger. All things considered, this is still better than all the other handheld frothers I've used over the years. After using the heck out of this thing for the past 7 months, I've even decided to start selling these in our Japanese gift shop. The manufacturer is has been very responsive both in customer support (I called them about an issue I thought I was having, and they called me back with a couple hours even though I didn't leave voicemail when they didn't answer right away) and in reseller support. I have to give these guys an A+ for responsiveness and quick resolution when problems might arise. HIGHLY recommended!!
      WAS THIS REVIEW HELPFUL?YesReportShare
      Reviewed in the United States on October 17, 2025

      recommand products

      Matratze für Falt-Dachzelt – gordigear
      26.01
      Dachzelt Thule Tepui Autana – Carisma
      27.53
      Journey Aluminium-Dachzelt: 2 Personen, 12 cm dünn
      28.17
      Dachzelt Elements 165cm mit Sky View Dachfenster
      29.91
      Mighty Oak Light 165 Dachzelt / Vickywood
      20.61