pedal motor Recessed Trolling Motor Foot Pedal Tray – Fits Minn Kota Corded Pedals (Replaces 100RTMP)

pedal motor Recessed Trolling Motor Foot Pedal Tray – Fits Minn Kota Corded Pedals (Replaces 100RTMP)Recessed Trolling Motor Foot Pedal Tray Fits Minn Kota Corded Pedals (Replaces 100RTMP) This universal recessed trolling motor foot pedal tray is designed for a clean, flush mounted installation of Minn Kota and other brands of corded foot pedals. Made from high strength, powder coated aluminum, this tray secures the foot pedal, protects it from the elements, and creates a more ergonomic and comfortable setup on your boat's deck. The design is

Recessed Trolling Motor Foot Pedal Tray – Fits Minn Kota Corded Pedals (Replaces 100RTMP)

This universal recessed trolling motor foot pedal tray is designed for a clean, flush-mounted installation of Minn Kota and other brands of corded foot pedals. Made from high-strength, powder-coated aluminum, this tray secures the foot pedal, protects it from the elements, and creates a more ergonomic and comfortable setup on your boat's deck.

The design is compatible with a wide range of Minn Kota models manufactured from 2007 onwards, including the PowerDrive, Terrova, and Ulterra series. This tray is a direct replacement for UanofCn 100RTMP, JLM Marine 100RTMP, and R&R Design 100RTMP.

• Installation Method: Recessed/Flush Mount in Boat Deck
• Material: High-Strength, Lightweight Powder-Coated Aluminum
• Key Feature: Includes a bottom drainage hole to prevent water collection

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across aftermarket brands.

Compatible Trolling Motor Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• 1 x Recessed Trolling Motor Tray (100RTMP)

Note: Installation hardware (screws), mounting template, and drain tube are NOT included.

Installation Guide

Warning: This installation requires cutting a hole in your boat's deck and should be performed by a qualified marine technician. Failure to properly install the tray can result in damage to your vessel.

1. Select a suitable location on your boat's deck that allows for comfortable foot pedal operation and is clear of structural supports, wiring, or plumbing underneath.
2. Carefully measure and mark the required cutout dimensions on the deck: 10-1/2" W × 17-3/4" L.
3. Drill pilot holes in the corners of your marked outline.
4. Use a jigsaw or appropriate cutting tool to carefully cut along the marked lines.
5. Test fit the tray to ensure it drops into the opening without binding. Sand or file the edges of the opening if necessary.
6. Apply a marine-grade sealant to the underside of the tray's flange to create a waterproof seal.
7. Firmly press the tray into place and secure it to the deck using appropriate stainless steel mounting hardware (not included) through the predrilled countersunk holes.
8. Connect a drain tube (not included) to the drainage hole on the bottom of the pan to route water away.

Troubleshooting & FAQ

Q: How do I know if this tray will fit my trolling motor's foot pedal?

A: This tray features a universal design intended for most corded foot pedals, especially Minn Kota models from 2007 and later. To ensure a proper fit, measure your foot pedal and compare it to the tray's inside dimensions: 9-3/4" W × 17" L × 4" D. Refer to the compatible models list for specific Minn Kota series.

Q: Do I really need to cut a hole in my boat's deck?

A: Yes, this is a recessed tray designed to sit flush with the deck for a clean, low-profile installation. This requires a cutout of 10-1/2" W × 17-3/4" L. We strongly recommend professional installation to ensure it is done safely and correctly.

Q: Does the tray come with mounting screws or a drain hose?

A: No, the package includes the recessed tray only. You will need to source your own mounting hardware (stainless steel screws are recommended) and a drain tube separately to complete the installation.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.