Pay in installments of $7.28 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 23 - Jul 28
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
64mm x 89mm card sleeves Sleeve Kings Card Sleeves: Super Large 89x146mm, 110 / PackSuper Large Game Card Sleeves (89x146mm) 110 Pack, 60 Micron, SKS 8831 Protect and preserve your oversized board game cards with Sleeve Kings Super Large Card Sleeves 89x146mm. Compatible with Kingdom Death: Monster, The Elder Scrolls: Call to Arms, The Big Score, Abomination: The Heir of Frankenstein, and any other board game using this card size, these sleeves deliver the ideal balance of durability, clarity, and value. Each sleeve is made from 100%
Super Large Game Card Sleeves (89x146mm) 110 Pack, 60 Micron, SKS-8831
Protect and preserve your oversized board game cards with Sleeve Kings Super Large Card Sleeves 89x146mm. Compatible with Kingdom Death: Monster™, The Elder Scrolls: Call to Arms™, The Big Score™, Abomination: The Heir of Frankenstein™, and any other board game using this card size, these sleeves deliver the ideal balance of durability, clarity, and value.
Each sleeve is made from 100% polypropylene, ensuring safe, long-term storage. The material is completely acid-free and contains no PVC, helping prevent yellowing, warping, or damage to your cards over time. With a thickness of 60 microns, these sleeves are noticeably stronger than typical thin sleeves, giving your cards better protection against bending, scratches, and everyday wear during gameplay.
The extra-clear finish allows for easy reading of all card details while maintaining a clean and professional look. Whether you are shuffling, storing, or displaying your cards, these sleeves provide consistent quality and smooth handling.
Each pack includes 110 sleeves, giving you 10% more coverage than standard 100-count packs, making it easier to sleeve full decks or multiple sets while maximizing value.
- PERFECT FIT FOR SUPER LARGE CARDS: Designed for oversized cards measuring 89x146mm, these sleeves provide a precise fit for Kingdom Death: Monster™, The Elder Scrolls: Call to Arms™, The Big Score™, Abomination: The Heir of Frankenstein™, and any other board game cards using this size.
- STRONGER 60 MICRON PROTECTION: Made with durable 60 micron thickness, these sleeves are significantly thicker than standard 40 micron alternatives, offering enhanced resistance against bends, scratches, and wear.
- EXTRA CLEAR FOR EASY VISIBILITY: Crafted with high-clarity polypropylene, these sleeves ensure your cards remain fully visible with no cloudiness, making reading and gameplay smooth and uninterrupted.
- SAFE, ARCHIVAL QUALITY MATERIALS: Constructed from 100% acid-free, PVC-free polypropylene, these sleeves protect your cards from long-term damage, preserving card quality for repeated use and storage.
- MORE VALUE WITH 110 SLEEVES PER PACK: Each pack includes 110 consistent, high-quality sleeves, giving you 10% more coverage compared to standard 100-count packs while maintaining excellent value for gamers and collectors. For more info on how we do this click HERE.
These sleeves are compatible with "Super Large" Sleeves (89x146mm) cards.
** Note Game Titles and their intellectual property rights are © and TM of their respective rights holders, no challenge to these rights is expressed or implied. Compatibility claims only extend to the physical size of the cards in each respective game and no claim to endorsement or authorization by the respective rights holders is expressed or implied by Sleeve Kings or Imperial Publishing. Our products are compatible with the respective games only and all rights are reserved by the respective rights holders.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 24 reviews
Sort
Product Reviews
★★★★★ 4
Easy Install Onto Jeep JKU, No Switch Backlight or Mounting Holes, Great Customer Service
Color: 5in Cube LED Pod, Color: 5in Cube LED Pod
I installed the Auxbeam 5" 168W LED Cube Pods onto my Jeep JKU Anniversary Steel Bumper. It was an easy install with some YouTube videos to help me snake the cables into the cab.
The unused holes in the steel bumper were the perfect size to fit the mounting bolts on the pod lights, and there was plenty of room to reach under the top edge of the bumper to install the nuts with some Loctite.
To snake the provided cable through the firewall, I had to remove the installed socket. This was easy to do by simply recessing the retainer clip on each pin, taking a picture of the wired connector before releasing the wires so I knew how to reassemble, snaking the connectorless cable through the firewall into the cab where the pins were then reinserted and locked into the connector. I dressed the cable by zip tie to the existing wire harness at the top of the engine bay. In the cab, I pulled the side panel from the dash (driver's side) and made a small hole for the cable in the panel. After cleaning the dash with alcohol, the adhesive-backed switch seems to hold nicely in place.
The lights were very bright and did a great job of illuminating the front and sides of the trail ahead of me.
No backlight on the switch, which is a necessity, and I dont understand why that feature is not present.
Also, there is no through hole to mount as the adhesive back won't stay attached, so the lack of a mounting hole is a big negative as well.
5 Month UPDATE: One of the lights got water inside. I noticed two screws that hold the glass cover were loose on the bottom of both sides. The other light also had the same loose screws but no water under the glass. I contacted Auxbeam, and they replaced the entire set in 2 days. Very awesome customer service.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2023
★★★★★ 5
Brightness and quality
Color: 4*2.5in Cube LED Pod
Got this for my 2024 Crosstrek. Got this one specifically due to its functionality that I wanted, quality for the price and it looks great especially DRL. I leave the Amber cover on most of the time. If you want the DRL to be on while the car is on, you can do that but it has to be rewired which I did. Love the brightness. I’ve been having this on my Crosstrek for a few months now and have no issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
★★★★★ 5
Bright lights
Color: 4*2.5in Cube LED Pod
Installed these on my Bronco as ditch lights. Very bright light and I like that you can have them be white or put the cover on them for and amber light look. Took about 30 minutes to install and wire to the upfitter switches. They shoot a wide angle covering your blind spots on dark roads. I got these to replace a three inch ditch light. They're made from heavy duty metal and stand up to the extreme weather. I like them so much that I purchased the seven inch lights and install them on the front bumper. For what they cost it was a price that I couldn't pass up. I highly recommend these lights.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 17, 2026
★★★★★ 5
Great product
Color: 4*2.5in Cube LED Pod, Color: 4*2.5in Cube LED Pod
Great lighting and beautiful design!!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 5
Best lights you can get for the best pricing!
Color: 5in Round LED Pod, Color: 5in Round LED Pod
I have had man different off road lights over the years for many different vehicles. Let me tell you about these 5” aux beams. I ordered these lights to go on my 2500 as ditch lights and I am beyond impressed! The lights showed up well packaged. When opening the box, the instructions where right on top and by far one if the easiest sets of instructions I’ve had for wiring diagrams. The lights were packaged and wrapped in foam all the way around to protect them from shipping. The wrapping of the lenses for scratch prevention was perfect. The included wiring harness was packed in a bag and laid out very easily for installation. The harness hooked to the battery and then to the lights with easy quick connects and had more than enough length to put the lights anywhere. Once they were mounted and installed I hooked them up to my aux beams switch panel with ease.
Now for the lights! The brightness is beyond bright enough to see miles away! These lights will shine anything you could ever want to see. The spot flood combo work exceptionally well for all situations and darkness. The side shooter stretch them beam out to the sites and can see all the way across. The running lights tie in very easy with your turn signals for extra turn lights or running lights. Heavy duty is an understatement for the quality of these lights. I’m still running them after several months with no water intrusion and still as bright as the day I installed them. The price for what you get, is far beyond better than other top brands! I will be buying more of these for my next off roading set up!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 23, 2025