sd9 pedal SONIC DISTORTION (SD-9) – Godlyke, Inc

sd9 pedal SONIC DISTORTION (SD-9) – Godlyke, IncIf you're interested in the SD9, please see Godlyke's new collaboration with both Mr. Tamura AND Scott Henderson, the TWA SH9 Scott Henderson Signature Distortion. Click Here to order your TWA SH9 Scott Henderson Signature Distortion. Please note: Godlyke, Inc. is no longer Maxon's Distributor and will no longer be receiving inventory from Maxon Japan. Reissue of classic Distortion from the 80s Great sustain and volume clean up Wide operation range

Please note: Godlyke, Inc. is no longer Maxon's Distributor and will no longer be receiving inventory from Maxon Japan. 

• Reissue of classic Distortion from the 80’s
• Great sustain and volume clean-up
• Wide operation range covers mid-gain Overdrive through Fuzz
• Versatile Tone control can provide bright top and tight, punchy lows
• Scott Henderson’s favorite Distortion!
• True Bypass Switching

Since its original release in the early 80’s the Sonic Distortion has gained a huge cult following among tone connoisseurs, including the likes of guitar legends Scott Henderson and Mike Landau.

Maxon’s current-production reissue captures all the magic of the original with the added benefit of true bypass switching.

The SD-9 provides a smooth distortion that covers a wide range of Gain levels from mild overdrive through pseudo-fuzz.  Regardless of the Gain setting, the SD-9 remains articulate and responsive to note dynamics, providing excellent sustain without crossing over into super-compressed Metal territory.

The SD-9’s Tone knob has plenty of top end on tap, yet notes still retain a round, full-bodied tonality with the low end presence usually associated with amp distortion.  The pedal’s midrange response is smooth and even – present without seeming spiked.

Since its humble origins to its current place in the pedalboards of the stars, the Maxon Sonic Distortion has proven itself to be a timeless classic that has only improved with age.

"The Maxon SD-9 is the best distortion pedal EVER made, period. It has the clarity and punch you get from a pedal, while retaining the low bass you get with amp distortion. The SD-9 is one of the rare pedals which sound equally great on both the neck and bridge pickups, whether they're humbucking or single coil. It's been a very important part of my tone for many years." - Scott Henderson

TECH TALK:

Input signal goes through a simple High-Pass filter into a transistor that’s set up as an emitter/follower (high input impedance – low output impedance).  After this it’s into an Op Amp stage designed to give a gain range of 67 to 567and a Low-Pass Filter with a corner frequency of approximately 1540 Hz.

From here it’s on to a set of opposing-direction diodes to ground and a tone control that is reminiscent of the Boss DS-1 (kind of a Big Muff dual High and Low cut - ending up with a mid scoop that has a high frequency limiting resistor with corner frequencies of 867Hz and 234Hz respectively).

The SD-9’s dual diodes to ground give a crunchier, chewier distortion than the popular 808-style “diodes in feedback loop” configuration.  Likewise, the SD-9’s mid scoop is practically the antithesis of the 808’s infamous mid hump.

After the tone control section it’s through to a volume control and into another E/F transistor to provide a low impedance output and then on to the true bypass switch.

The SD-9 features Mechanical True Bypass switching via a Fujisoku 4PDT switch - Input is switched to ground when bypassed.

Input Impedance: 500K Ohms

Input Jack: 1/4 inch standard phone jack

Output Impedance: 10K Ohms

Output Jack: 1/4 inch standard phone jack

Output: 1

Equivalent Input Noise: -114 dB or less (input shorted IHF-A weighted)

Maximum Output Level: 0 dBm

Maximum Gain: +42 dB (at 2.0 KHz)

Controls: Distortion, Tone, Level

Switch: Normal/Effect (true bypass configuration)

Power Supply: 9V Manganese dry cell battery (6F22) or special AC adaptor

Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor)

Current Consumption: 6 mA (9 V) / 7 mA (10 V)

AC Adaptor: AC210N (option) Input: AC120V Output: DC9V/200 mA Center - / Sleeve +)

Dimensions (whole): 74 mm (W) x 124 mm (D) x 54 mm (H)

Weight: 580 g

Warranty Card: x 1

User's Manual: x 1

* All specifications are subject to change for improvement without notice or obligation.All brand names and product names are trademarks or registered trademarks of their respective companies.