delay looper pedal JOYO R-07 Aquarius Multi Delay and Looper Pedal

delay looper pedal JOYO R-07 Aquarius Multi Delay and Looper PedalJOYO R 07 Aquarius Multi Delay and Looper Pedal AQUARIUS is a multi mode digital delay pedal with 8 digital delay effects and a loop. Apart from the iconic digital, analog delay effects, there are well designed styles such as Low bit, Galaxy and more. Tap Tempo enables you to adjust delays speed. It also features a LOOPER function, with 300 seconds (5 minutes) of recording time. What distinguishes AQUARIUS from similar products is that LOOPER and

JOYO R-07 Aquarius Multi Delay and Looper Pedal

AQUARIUS is a multi-mode digital delay pedal with 8 digital delay effects and a loop. Apart from the iconic digital, analog delay effects, there are well-designed styles such as Low bit, Galaxy and more. Tap Tempo enables you to adjust delay’s speed. It also features a LOOPER function, with 300 seconds (5 minutes) of recording time. What distinguishes AQUARIUS from similar products is that LOOPER and Delay functions can be used simultaneously.


The JOYO Aquarius has 8 different delay settings to select from, they are:

• Digital Delay - For crisp note delays, retaining the shape and tone
• Analog Delay - For smooth rounded delays, gradually losing shape.
• Tape Echo - Sounding like a tape echo, crisp modulating repeats.
• Tube Echo - Sounding like a true tube and tape echo, gradually losing shape.
• Reverse Echo - It makes everything backwards and shoegazy.
• Low Bit - glitchy 8 bit, for some nice lo fi glitch repeats
• Galaxy - far out spacey, a little bit of glitchy reverse, out of this world..
• Mod - adds chorus modulation to the repeats.

The Tap Tempo function enables you to adjust the delay’s speed in between the repeats. Hold down the footswitch for 2 seconds to activate the tap tempo mode the LED goes red. Then tap the switch for the start and tap again for the end. The time between is the delay time.


Features:

• Controls: Level, Time, Feedback, Delay Mode Selector, Looper ON/OFF, LED Toggle
• Effect types: Delay + Looper
• Effect numbers: 8 Delay + 1 Looper
• Controls: Level/Vol, Time/Tone, F.Back/Tape, Type Select
• Footswitchs: 1
• Input Jack: 1/4"
• Output Jack: 1/4"
• Input Impedance: 2.2MK ohm
• Output Impedance: 100 ohm
• Rated current consumption: 150mA
• Working Voltage: DC 9V (center negative)
• Signal Bypass Type: Bypass
• LED Mod: Sync, Always, Off
• Battery powered: No
• Dimensions:: 4.3" x 2.6" x 1.9"
• Weight: 9 oz

NOTE: The Aquarius has no battery compartment, it requires a 9v center negative power supply.