SKU: 98027255523
wall plant rack

wall plant rack Yonkers Steel Wall Planter - Horizontal Plant Holder

Sale price$18.74 Regular price$20.82
Save 10%

Pay in installments of $5.21 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 23 - Jul 28

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

wall plant rack Yonkers Steel Wall Planter - Horizontal Plant HolderElevate your green thumb with our Yonkers Plant Holder, designed to lift your plants up and show them off in both indoor outdoor spaces. Each unit is made to order and handcrafted from locally sourced steel to offer the finest quality and finish. We meticulously weld each round steel pot holder to a single 2 inch wide flat bar for simple installation and offer a variety of sizes, each with either 4 or 6 holders of varying circumferences (see sizes

Elevate your green thumb with our Yonkers Plant Holder, designed to lift your plants up and show them off in both indoor/outdoor spaces. Each unit is made to order and handcrafted from locally sourced steel to offer the finest quality and finish. We meticulously weld each round steel pot holder to a single 2-inch wide flat bar for simple installation and offer a variety of sizes, each with either 4 or 6 holders of varying circumferences (see sizes below). Tip: For a planter placed outdoors, select the raw, uncoated metal finish to achieve a more weathered, rustic look.

Dimensions:

- ¼” thick steel

- 2” wide flat bar

- 2-3” depth from wall (depending on style)

- Pre-drilled #10 holes for easy mounting

Details:

- Mounting hardware (Screws) and towel not included

- Price is for One (1) horizontal planter.

- Each ring will hold a single plant pot

- Made to Order

- Handmade in the USA

- Locally sourced steel

Size Dimensions

- 20" Planter measures 20" hole to hole with two (2) 4" rings

- 24" Planter measures 24" hole to hole with three (3) 4" rings

- 24" Planter measures 24" hole to hole with two (2) 6" rings

- 30" Planter measures 30" hole to hole with four (4) 4" rings

- 30" Planter measures 30" hole to hole with three (3) 6" rings

- 36" Planter measures 36" hole to hole with five (5) 4" rings

- 36" Planter measures 36" hole to hole with four (4) 6" rings

- 40" Planter measures 40" hole to hole with six (6) 4" rings

- 40" Planter measures 40" hole to hole with five (5) 6" rings

Finishes

Raw Uncoated Steel

Flat Black Powder Coat

Gold Powder Coat

Copper Powder Coat

Silver Powder Coat

Raw uncoated: reveals the steel’s natural luster, unprotected from rust. Recommended for those seeking a weathered, rusted finish or for those who plan to paint/coat the bracket themselves.

Powder coat: creates a smooth, sealed finish in the desired color and offers extra rust protection. Recommended for use in potentially wet spaces such as a bathroom or outside.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 98027255523

Discover Niche Categories That Outsell wall plant rack

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 11 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Ligia
Lexington, US
★★★★★ 5
Better than Kilmat
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Great adhesion, and you can immediately see the sound difference when you rap the area and compared it to another area without it. Also, very easy to cut and apply. Once on, you may not be able to peel it and reposition it, so be sure where you want it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2026
J
Verified Purchase
J M.
Grantham, US
★★★★★ 3
Not much noise reduction…
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Easy to install but did not provide much sound dampening…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
T
Verified Purchase
Travis McKinstry
Louisville, US
★★★★★ 5
High quality, super sticky, very effective
Style: 30 sqft
As long as the surface is thoroughly cleaned, these mats will stick to just about anything. They provide my car with a tremendous amount of sound dampening and have made riding in the car 10 times more enjoyable. I drive a Toyota Yaris and although the engine is built like it's meant to last forever (imagine that), the rest of the car is not of high quality. Which means we used to get A LOT of noise coming from the road, other cars, etc. After I installed these mats which, by the way, I wasn't able to install on every surface I wanted to install them on (due to lack of tools to be able to disassemble certain parts of the interior), the noise coming from outside the car is nearly completely gone. I covered the underside of my hood, the entire interior part of the hatchback, most of the floor in the trunk / spare tire well, and the entire interior side of the doors. The parts I couldn't get to (or didn't want to) were: the ceiling, underneath the driver & passenger seats, behind the dash and the floor for the 2nd row seating. As you can see I left a lot of surfaces untreated with this product AND STILL it blocks most of the sound. To note: people recommended getting the roller tools to help install these mats. I got a few of them in different sizes and they worked O K. Not because of the quality of the tool but because some places you need to install these mats in don't have enough clearance to use the tool. That being said, for the larger surfaces, the roller tools help a lot. Also I found it very beneficial to use aluminum tape while installing these. The tape I used is specifically designed for materials that undergo high temperature changes (like your dryer vents, etc.). This wasn't because the mats were not sticky enough but because there were some places I installed the mats with small gaps between them. I'd also recommend getting some kind of fluffy insulation-type material for large spaces that need noise dampening. Rock wool, for example, worked great for me. As an example, the interior sides of the 2nd row seating walls had large spaces between the plastic interior cover and the metal part of the car wall. I'd install the mats on the metal but was left with 6" - 7" of space between it and the plastic cover. I chose to fill those spots (and spots like it) with insulation which provided EVEN MORE noise dampening.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 25, 2024
C
Verified Purchase
Cee
Bozeman, US
★★★★★ 5
Best butyl out there.
Style: 30 sqft
If you want the money you're spending on equipment to pay off, you NEED to deaden sound! I've used every major brand and siless is my favorite to work with and the best value for your money, I'm not just adding weight, it's a thermal barrier and reduce outside noise. I turned a 10 year old, base model civic into what feels like a top tier Lexus . Does not offgas, no smell. Super easy to install. Make sure you get a set of rollers! They're required to achieve the advantages of this stuff, it MUST be adhered well and you don't want to tear the interior out twice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2025
A
Verified Purchase
Amazon Customer
Birmingham, US
★★★★★ 5
Yes
Style: 30 sqft
Easy to work with, quiets doors very well, cuts very easily to any shape needed or wanted with scissors, sticks well, and molds in to place well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026

recommand products