Pay in installments of $6.70 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 16 - Jul 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
philodendron florida beauty reverted Philodendron Florida Beauty – Foliage FactoryPhilodendron 'Florida Beauty' ('Magic Mask') Philodendron 'Florida Beauty' is a variegated climbing Philodendron from the Florida hybrid group. It produces deeply lobed green leaves splashed with cream, yellow and pale green, with the pattern shifting from leaf to leaf along the stem. The plant extends from a node bearing climbing stem. Support helps keep the internodes shorter, gives aerial roots a surface to grip and allows the lobed leaves to open
Philodendron 'Florida Beauty' ('Magic Mask')
Philodendron 'Florida Beauty' is a variegated climbing Philodendron from the Florida hybrid group. It produces deeply lobed green leaves splashed with cream, yellow and pale green, with the pattern shifting from leaf to leaf along the stem.
The plant extends from a node-bearing climbing stem. Support helps keep the internodes shorter, gives aerial roots a surface to grip and allows the lobed leaves to open with enough space around the petioles.
Lobed variegation on a climbing Florida Philodendron
- Foliage: Deeply divided green leaves with irregular cream, yellow and pale green variegation.
- Growth habit: Climbing vine with aerial roots along the nodes.
- Hybrid group: Part of the Florida Philodendron group, with deeply lobed foliage, climbing growth and textured petioles.
- Stem detail: Petioles and stems may show reddish tones or lightly textured surfaces.
- Patterning: Variegation follows the stem tissue, so pattern strength can differ strongly from leaf to leaf.
Patterned stems and Florida group growth
The Florida Philodendron group traces back to Robert “Bob” McColley’s mid-20th-century breeding work in Florida, with the original hybrid usually attributed to Philodendron squamiferum × Philodendron pedatum. Philodendron pedatum (Hook.) Kunth was published in Enumeratio Plantarum 3:49 in 1841, while Philodendron squamiferum Poepp. was published in Nova Genera ac Species Plantarum 3:87 in 1845.
Philodendron 'Florida Beauty' is the variegated form grown in this group, with lobed leaves, patterned stem tissue and climbing stems that produce better-sized leaves on support. Bright indirect light helps the plant keep shorter internodes and larger leaves, while direct sun can scorch the pale sectors. Fully green stems can be cut back to a patterned node to keep variegated growth active.
Bright indirect light, support and pruning cues
- Light: Provide bright indirect light, around 10,000–20,000 lux, with direct midday sun filtered away from pale leaf sectors.
- Watering: Water when the upper 30–50% of the substrate has dried; keep the root zone evenly rehydrated, then well drained.
- Substrate: Use a chunky aroid mix with bark, coco chips, perlite or pumice and a small moisture-retentive component.
- Pot choice: Use a pot with drainage holes and enough depth or weight to keep the climbing stem and support stable.
- Repotting: Repot when roots fill the pot, the support becomes unstable or the substrate starts breaking down. Move up gradually to keep the root zone airy.
- Humidity: Keep 50–70% humidity for smoother leaf expansion and stronger aerial-root activity.
- Temperature: Maintain 18–29°C and protect the plant from cold draughts or cold windows.
- Support: Add a pole or trellis early so the climbing stem stays better aligned and leaves can become larger and more divided over time.
- Feeding: Feed lightly during active growth; avoid strong fertiliser doses that can stress pale leaf tissue and roots.
- Growth rate: Expect moderate climbing growth once the plant is rooted, warm and supported. Leaf size and division improve gradually on a stable stem.
- Placement: Place it where the lobed leaves have room to open without pressing against glass, walls, shelves or neighbouring plants.
- Semi-hydroponics: This Philodendron can adapt to mineral or semi-hydro substrates if roots are transitioned gradually and the reservoir is kept clean.
- Pruning: Cut fully green growth back to a node that has visible variegation in the stem.
- Propagation: Propagate from stem cuttings with at least one node. Choose patterned stem sections if you want to continue variegated growth.
Leaf marks, green shoots and pest checks
- Brown marks on pale sectors: Check for direct sun, dry roots or physical damage; cream and yellow tissue marks more easily than green tissue.
- Fully green new growth: Trace the stem back to a variegated node and prune if the plant is reverting.
- Very small leaves: Add support, improve light and check whether the roots are active and filling the pot.
- Yellowing leaves: Check watering depth, drainage and root temperature before changing fertiliser.
- Sticky residue or distorted growth: Inspect leaf undersides, petiole bases, cataphylls and new growth for thrips, mites, scale and mealybugs.
Handling and toxicity
Philodendron 'Florida Beauty' is toxic if ingested. Like other Philodendron plants, it contains insoluble calcium oxalate crystals that can irritate the mouth and throat. Keep it away from pets and children, especially when pruning or removing cuttings.
Florida Beauty, Magic Mask and the genus name
Philodendron is an Araceae genus named from Greek roots meaning “tree-loving”. 'Florida Beauty' refers to the variegated foliage of this Florida hybrid, while 'Magic Mask' is also used for this plant in cultivation.
Deeply lobed Florida hybrid foliage, cream-yellow marbling and patterned climbing stems give Philodendron 'Florida Beauty' its variegated climbing character.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option.
There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk.
Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine.
The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two).
In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles.
Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need.
The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup.
Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room.
The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams.
The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026