Pay in installments of $5.03 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 24 - Jul 29
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
uppababy minu v2 infant insert UPPAbaby MESA V2 Infant Car SeatMESA v2. See how simple. UPPAbaby designed the MESA with intuitive innovations you can see and features that remove the guesswork. The MESA maximizes ease to minimize error, which allows parents to move forward with confidence and security. Suitable 4 35 lbs and up to 32 in height MESA Safety SMARTSecureTM system: Make installation quick and simple by combining our innovative SMARTSecure system, auto retracting LATCH design, red to green tightness
MESA v2. See how simple.
UPPAbaby designed the MESA with intuitive innovations you can see and features that remove the guesswork. The MESA maximizes ease to minimize error, which allows parents to move forward with confidence and security.
Suitable 4-35 lbs and up to 32″ in height
MESA Safety
- SMARTSecureTM system: Make installation quick and simple by combining our innovative SMARTSecure® system, auto-retracting LATCH design, red to green tightness indicator, and four-position adjustable foot.
- Tightness indicator: It’s as easy as red to green. When the tightness indicator turns green, it provides confirmation that the seat is installed correctly whether using LATCH or belt.
- Auto-retracting LATCH: Unlike traditional LATCH connectors, MESA’s unique retracting LATCH system tightens effortlessly, minimizing installation error.
- Protection from all sides: The adjustable headrest is reinforced with EPP foam to help absorb energy while the integrated design of our Side Impact Protection keeps baby’s head protected during a collision. Additionally, the 4th rebound carry handle position allows for increased safety and aids in absorbing rebound forces.
- Optimized for preemies 4 lbs+: The removable infant insert is designed to provide better fit and body positioning for babies approximately 4 – 11 lbs.
- European Routing: European Routing provides a safe and secure carrier-only installation when the use of a base isn’t convenient. The belt path easily secures the carrier at three points of contact to reduce movement.
MESA Convenience
- Fire retardant free fabrics: The MESA V2 is made with fabric that is free from fire retardant chemicals for all fashions and textiles, including the large UPF 25+ hideaway canopy. It is also GREENGUARD® GOLD Certified to support healthier air quality and low chemical emissions.
- Buckle up with confidence: The simple one-crotch buckle position and no-rethread, adjustable harness makes buckling up a breeze.
- Performance travel system: For the ultimate in portability and safety, MESA V2 directly attaches to both the VISTA® and CRUZ® strollers. It is even compatible with the MINU® and RIDGE® with the addition of convenient adapters. This creates a stylish and simple solution that goes from drive to stroll (and back again).
- Expandable options: Whether you’re having twins or this is your second or third time around, the MESA paired with the VISTA can accommodate your growing family.
- Quick release button: A quick press of the button on the top of the carrier handle releases it from the frame so you can go from stroller to car in one seamless motion. Additionally, the convenient, reversible option allows baby to face you while strolling, or you can turn the carrier to pull right up to a table for mealtime.
- No-rethread harness: As your infant grows, the MESA infant car seat adapts. MESA’s unique no-rethread five-point harness is adjustable from the front, allowing for proper fitting in just seconds.
- Removable and washable fabric and canopy: It’s a fact of life -- babies dribble and drool. MESA's seat fabric and canopy fabric is easily removable for cleanup without the need to disassemble the harness.
- Hideaway canopy with SPF 25+: The extra-large integrated, extendable canopy provides more protection outside and conveniently tucks away when not in use.
- Level indicators on both sides of base: Whether you are installing from the left or right side of the car, level indicators confirm that your seat is properly leveled.
- Finished base bottom: Smooth, finished base bottom minimizes indents and eliminates the need for a seat protector.
Specifications
- Suitable 4-35 lbs and up to 32″ in height, whichever comes first
- Infant insert with wedge recommended for preemies and smaller newborns 4-11 lbs.
Dimensions
- Infant Car Seat: 17”W x 25.8”L x 23”H
- Car Seat on Base: 17”W x 28”L x 25”H
- Base: 14.5”W x 21.3” L x 10.3” H
- Carrier weight: 9.9 lbs
- Base weight: 9 lbs
Includes
Infant car seat, car seat base and infant insert (for use with children 4-11 lbs)Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 3
Nice Edger as long as the blade doesn't come loose -- and it will come loose, repeatedly!
Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 11, 2022
★★★★★ 5
Great edger for home use
This WORX 12 Amp Electric Lawn Edger did exactly what I needed it to do. It was easy to use, had plenty of power for cleaning up the edges around my driveway and sidewalk, and gave the yard a much cleaner, finished look. I like that it is corded because I do not have to worry about batteries dying, and it has enough power for regular homeowner use.
The first pass took a little extra time since the edges needed cleaned up, but once I got going, it worked great. Overall, this is a solid edger/trencher for the price, and I would definitely recommend it for anyone wanting cleaner lawn edges without dealing with gas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Little work horse!
I LOVE the look of an edged sidewalk. After a few calls to some local landscape companies, I couldn't find anyone with an edger. Crazy! So I bought myself this one! Super easy to put together and just as easy to use. My walk hasn't been edged for many years and was very overgrown. I was nervous that I wouldn't be able to run this thing, but this little work horse did the job for me and did it perfectly. It will be super easy to keep it edged now. Extremely happy with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc.
That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it.
For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in.
There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade.
Be careful not to lose sight of your electric cord so you don't hit it!
I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly.
If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know.
Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn.
The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb.
I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal.
Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
★★★★★ 5
Does the job!
Puts in the work! Knocked out my driveway no problem. Unsure about longevity but it’s great for a homeowner. Easy to assemble. Easy to use. Adjustment is nice along with the guide plate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026