SKU: 92888614548
air plants cincinnati

air plants cincinnati Hybrid No. 1 Air Plant

Sale price$26.14 Regular price$29.05
Save 10%

Pay in installments of $7.26 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 20 - Jul 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

air plants cincinnati Hybrid No. 1 Air PlantT. Hybrid No. 1 Air Plants, Approximately 4 6" Tillandsia Hybrid 1, also known as T. Houston "cotton candy", is a cross between a Stricta and Recurvifolia. T. Hybrid 1 is a medium sized air plant. It's leaves are a silvery light green color that are firm and pointed. When in bloom, T. Hybrid 1 will display a cotton candy pink inflorescence and bright white flowers. It's optimal temperature is 75 + 10, with tolerance for higher temperatures and

T. Hybrid No. 1 Air Plants, Approximately 4-6"

Tillandsia Hybrid 1, also known as T. Houston "cotton candy", is a cross between a Stricta and Recurvifolia. T. Hybrid 1 is a medium sized air plant. It's leaves are a silvery light green color that are firm and pointed. When in bloom, T. Hybrid 1 will display a cotton candy pink inflorescence and bright white flowers. It's optimal temperature is 75 +/- 10, with tolerance for higher temperatures and humidity. They appreciate bright stippled sunny areas of lighting.


From Green to Blush

T. Hybrid 1 is a medium sized air plant with a firm dense rosette of smooth-edged straight leaves. They display a silvery light green color with prominent trichomes covering the entire length of the leaves. When transitioning into blush, their leaves will begin to change from green to a soft pink color focusing near the bloom.

The leaves are a great indicator for the plants need for water. When underwatered, they may show signs of leaf curling, browning and/or may be dry to the touch. Care must be taken to ensure water does not pool in its base, as this will cause rot. Good air flow will assist with drying and turning the plant upside down after watering will prevent water from pooling.


Bud Formation & Blooms

T. Hybrid No. 1 blooms from early spring through late summer. They have a long lasting bloom with shades of rose and pink followed by an impressive bloom displaying a large pink colored inflorescence and many bright white flowers.

Their flowers can be enjoyed for several days and will then begin to dry up over the next couple of weeks until the entire inflorescence has completely dried out. At this point you can trim the inflorescence for aesthetic purposes or leave it as is.

Fertilizing your Tillandsia with The Drunken Gnome's Bromeliad & Air Plant Food will help encourage budding and brighter blooms.


Reproduction & Propagation

T. Hybrid No. 1 have a life cycle of growing to maturity and then blooming. Before, during or after blooming the T. Hybrid No. 1 will start producing new baby plants called offsets, which are also known as pups. On average it will produce between 1 - 4+ pups.

The pups will obtain nutrients from the mother plant as she ends her lifecycle. If left to colonize, they will continue to grow to maturity, bloom and reproduce, forming a clump.

They can also be separated into individual plants once the pups grow to 1/3 or half the size of the mother plant. A gentle tug and twist will not hurt the plants as you remove the pups.


Receiving Your Airplant

No matter what stage your T. Hybrid No. 1 is in at the time of arrival, it will continue to grow and change over time.

Once you receive your new air plant(s), it's important to give them a good soaking and acclimate them to their new environment.

Take care of your air plants and provide for them by nourishing them with adequate sunlight, airflow, water and nutrients and they will reward you for years to come!

Please Note* Air plant size, color and growth stage may vary slightly according to availability. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 92888614548

Discover Niche Categories That Outsell air plants cincinnati

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Andrew
Waukegan, US
★★★★★ 5
Good shelves!
Easy enough to assemble and as shown in the pictures you can shape the shelves how you want them. There is one screw hole in the mounting bracket right in the narrow part which makes it difficult to get a screw into. To get around this I just put a screw in at an angle. The quality is decent and I would not overload these by any means. However, if you are looking for cheaper shelves that look decent for light items these will work great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 10, 2025
J
Verified Purchase
Jan
Whiting, US
★★★★★ 3
Great shelves for the price (~$15), but could be better.
Unlike many others here reviewing the item, I took note of the dimensions & the rough surface of the wood *before* purchasing it & read the instructions that tells you how NOT to assemble it. So my review won't be mentioning how it was smaller than I expected, how unexpectedly rough the wood was, or the fact that it fell off my wall because I didn't read the instructions. About how NOT to install it- never screw into the board such that the weight is relying on the *screws* to keep it up. Whichever way you place the brackets in relation to the wood, above or below, make sure the weight is ON THE BRACKETS. In other words, *never* screw in from THE TOP OF the shelf. The instructions specifically point this out, so if you see any reviews about the screws stripping out of the wood and the thing crashing to the floor-- they didn't read the instructions and they assembled it incorrectly. And no, unlike what some reviews here are telling you, it is not painted plastic. It is wood. I sanded it, it's wood. They tell you that in the description of the item, too. Paulownia, but yes, the weight of it reminds you of styrofoam, which isn't a bad thing. Ive read its a sturdy wood, relative to how much it weighs. I was already expecting rough boards when I bought it, but on top of that fact the surface had the grossest hand-feel I've ever felt (probably from the surface + the paint they used) that I ended up lightly sanding it with 120 grit (which helped a ton with the feel while also doing very little to the painted surface) and painted it with some white paint that we had on hand (it was originally grey). Much better. The brackets getting in the way of screwing is awful because I don't have a 90° angle screwdriver, but it worked out alright enough. The resulting angle wasn't severe by any means, but still I recommend making sure you have a 90° angle screwdriver before purchasing because I'd much rather it be nice, clean, flush screws. One point of serious suggestion for the seller would be that the brackets need more than a quick dot of welding. Even though my brackets came relatively even and all with unbroken welding, judging from other reviews and looking at mine, this is an area that could definitely do with some improvement. Another suggestion for the seller would be to include a few extra drywall anchors. I ended up breaking three of them trying to get them in my drywall and now I have to go find some replacements. I think our drywall is about as petrified as our studs because in looking up external sources for the best method of installing these types of anchors (to make sure I wouldn't break any. smh) they recommend to NOT predrill, as these are made with no predrilling in mind. However, when trying to initially gently hammer them in with my rubber mallet as the instructions stated, they just weren't penetrating the drywall very far and I even made sure to pierce the paint layer (which is recommended if your walls have a thick layer of paint from over the years). I actually ended up quite extensively drilling in order to get the first portion of the anchors (before the threads) into the wall without doing too much damage to the anchors. Ive gotten two of the three shelves up but can't get the last one up until I get more drywall anchors. So far so good. Lightly hand sanded and a couple coats of paint slapped on them and I quite like them. Definitely takes a lot of time installing them though, so expect that before going into it. Rated 3 stars for the gross hand-feel, the brackets needing more welding, the brackets that could've been more even with each other, the lack of warning that you'd need a 90° angle screwdriver, and the lack of backup drywall anchors.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 1, 2023
A
Verified Purchase
Amazon Customer
Bozeman, US
★★★★★ 5
WOULD buy again!!
Color: Dark Brown
VERY STURDY! Id buy them again. Easy to clean & hang on the wall. Look good hanging up. Weight capacity is more then i thought it would be.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 16, 2026
D
Verified Purchase
Danielle M.
Bozeman, US
★★★★★ 5
style, durability, and functionality
The Amada HOMEFURNISHING Floating Wall Shelves offer a perfect blend of style, durability, and functionality. Whether you're looking to display decorative items or need extra storage space, these shelves are a valuable addition to any room. Their easy installation and sturdy design make them a worthwhile investment for enhancing your home's decor.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2025
A
Verified Purchase
APR
Cuba, US
★★★★★ 5
A Victorian Addition
Color: 4 Panels Black Wood, Size: 4 Panels, Color: 4 Panels Black Wood, Size: 4 Panels
I am so impressed! This room divider is a piece of Victorian architecture for my dressing area. Well made , eye-catching and refined...just beautiful!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026

recommand products