SKU: 92656106477
houston dark pink air plant

houston dark pink air plant Hybrid No. 1 Air Plant

Sale price$22.74 Regular price$25.27
Save 10%

Pay in installments of $6.32 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 23 - Jul 28

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

houston dark pink air plant Hybrid No. 1 Air PlantT. Hybrid No. 1 Air Plants, Approximately 4 6" Tillandsia Hybrid 1, also known as T. Houston "cotton candy", is a cross between a Stricta and Recurvifolia. T. Hybrid 1 is a medium sized air plant. It's leaves are a silvery light green color that are firm and pointed. When in bloom, T. Hybrid 1 will display a cotton candy pink inflorescence and bright white flowers. It's optimal temperature is 75 + 10, with tolerance for higher temperatures and

T. Hybrid No. 1 Air Plants, Approximately 4-6"

Tillandsia Hybrid 1, also known as T. Houston "cotton candy", is a cross between a Stricta and Recurvifolia. T. Hybrid 1 is a medium sized air plant. It's leaves are a silvery light green color that are firm and pointed. When in bloom, T. Hybrid 1 will display a cotton candy pink inflorescence and bright white flowers. It's optimal temperature is 75 +/- 10, with tolerance for higher temperatures and humidity. They appreciate bright stippled sunny areas of lighting.


From Green to Blush

T. Hybrid 1 is a medium sized air plant with a firm dense rosette of smooth-edged straight leaves. They display a silvery light green color with prominent trichomes covering the entire length of the leaves. When transitioning into blush, their leaves will begin to change from green to a soft pink color focusing near the bloom.

The leaves are a great indicator for the plants need for water. When underwatered, they may show signs of leaf curling, browning and/or may be dry to the touch. Care must be taken to ensure water does not pool in its base, as this will cause rot. Good air flow will assist with drying and turning the plant upside down after watering will prevent water from pooling.


Bud Formation & Blooms

T. Hybrid No. 1 blooms from early spring through late summer. They have a long lasting bloom with shades of rose and pink followed by an impressive bloom displaying a large pink colored inflorescence and many bright white flowers.

Their flowers can be enjoyed for several days and will then begin to dry up over the next couple of weeks until the entire inflorescence has completely dried out. At this point you can trim the inflorescence for aesthetic purposes or leave it as is.

Fertilizing your Tillandsia with The Drunken Gnome's Bromeliad & Air Plant Food will help encourage budding and brighter blooms.


Reproduction & Propagation

T. Hybrid No. 1 have a life cycle of growing to maturity and then blooming. Before, during or after blooming the T. Hybrid No. 1 will start producing new baby plants called offsets, which are also known as pups. On average it will produce between 1 - 4+ pups.

The pups will obtain nutrients from the mother plant as she ends her lifecycle. If left to colonize, they will continue to grow to maturity, bloom and reproduce, forming a clump.

They can also be separated into individual plants once the pups grow to 1/3 or half the size of the mother plant. A gentle tug and twist will not hurt the plants as you remove the pups.


Receiving Your Airplant

No matter what stage your T. Hybrid No. 1 is in at the time of arrival, it will continue to grow and change over time.

Once you receive your new air plant(s), it's important to give them a good soaking and acclimate them to their new environment.

Take care of your air plants and provide for them by nourishing them with adequate sunlight, airflow, water and nutrients and they will reward you for years to come!

Please Note* Air plant size, color and growth stage may vary slightly according to availability. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 92656106477

Discover Niche Categories That Outsell houston dark pink air plant

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
rkruz
Los Angeles, US
★★★★★ 4
Easy Install Onto Jeep JKU, No Switch Backlight or Mounting Holes, Great Customer Service
Color: 5in Cube LED Pod, Color: 5in Cube LED Pod
I installed the Auxbeam 5" 168W LED Cube Pods onto my Jeep JKU Anniversary Steel Bumper. It was an easy install with some YouTube videos to help me snake the cables into the cab. The unused holes in the steel bumper were the perfect size to fit the mounting bolts on the pod lights, and there was plenty of room to reach under the top edge of the bumper to install the nuts with some Loctite. To snake the provided cable through the firewall, I had to remove the installed socket. This was easy to do by simply recessing the retainer clip on each pin, taking a picture of the wired connector before releasing the wires so I knew how to reassemble, snaking the connectorless cable through the firewall into the cab where the pins were then reinserted and locked into the connector. I dressed the cable by zip tie to the existing wire harness at the top of the engine bay. In the cab, I pulled the side panel from the dash (driver's side) and made a small hole for the cable in the panel. After cleaning the dash with alcohol, the adhesive-backed switch seems to hold nicely in place. The lights were very bright and did a great job of illuminating the front and sides of the trail ahead of me. No backlight on the switch, which is a necessity, and I dont understand why that feature is not present. Also, there is no through hole to mount as the adhesive back won't stay attached, so the lack of a mounting hole is a big negative as well. 5 Month UPDATE: One of the lights got water inside. I noticed two screws that hold the glass cover were loose on the bottom of both sides. The other light also had the same loose screws but no water under the glass. I contacted Auxbeam, and they replaced the entire set in 2 days. Very awesome customer service.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2023
K
Verified Purchase
Kevin Sanguansukdikosol
Massapequa, US
★★★★★ 5
Brightness and quality
Color: 4*2.5in Cube LED Pod
Got this for my 2024 Crosstrek. Got this one specifically due to its functionality that I wanted, quality for the price and it looks great especially DRL. I leave the Amber cover on most of the time. If you want the DRL to be on while the car is on, you can do that but it has to be rewired which I did. Love the brightness. I’ve been having this on my Crosstrek for a few months now and have no issues.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2026
T
Verified Purchase
Thomas Chapman
Chelsea, US
★★★★★ 5
Bright lights
Color: 4*2.5in Cube LED Pod
Installed these on my Bronco as ditch lights. Very bright light and I like that you can have them be white or put the cover on them for and amber light look. Took about 30 minutes to install and wire to the upfitter switches. They shoot a wide angle covering your blind spots on dark roads. I got these to replace a three inch ditch light. They're made from heavy duty metal and stand up to the extreme weather. I like them so much that I purchased the seven inch lights and install them on the front bumper. For what they cost it was a price that I couldn't pass up. I highly recommend these lights.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 17, 2026
A
Verified Purchase
Abraham Hazim
Pawtucket, US
★★★★★ 5
Great product
Color: 4*2.5in Cube LED Pod, Color: 4*2.5in Cube LED Pod
Great lighting and beautiful design!!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
M
Verified Purchase
matt
Grantham, US
★★★★★ 5
Best lights you can get for the best pricing!
Color: 5in Round LED Pod, Color: 5in Round LED Pod
I have had man different off road lights over the years for many different vehicles. Let me tell you about these 5” aux beams. I ordered these lights to go on my 2500 as ditch lights and I am beyond impressed! The lights showed up well packaged. When opening the box, the instructions where right on top and by far one if the easiest sets of instructions I’ve had for wiring diagrams. The lights were packaged and wrapped in foam all the way around to protect them from shipping. The wrapping of the lenses for scratch prevention was perfect. The included wiring harness was packed in a bag and laid out very easily for installation. The harness hooked to the battery and then to the lights with easy quick connects and had more than enough length to put the lights anywhere. Once they were mounted and installed I hooked them up to my aux beams switch panel with ease. Now for the lights! The brightness is beyond bright enough to see miles away! These lights will shine anything you could ever want to see. The spot flood combo work exceptionally well for all situations and darkness. The side shooter stretch them beam out to the sites and can see all the way across. The running lights tie in very easy with your turn signals for extra turn lights or running lights. Heavy duty is an understatement for the quality of these lights. I’m still running them after several months with no water intrusion and still as bright as the day I installed them. The price for what you get, is far beyond better than other top brands! I will be buying more of these for my next off roading set up!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 23, 2025

recommand products