SKU: 83752046738
philodendron heterocraspedon for sale

philodendron heterocraspedon for sale Philodendron heterocraspedon – Long Ribbed, Scalloped Leaves

Sale price$21.74 Regular price$24.16
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

philodendron heterocraspedon for sale Philodendron heterocraspedon – Long Ribbed, Scalloped LeavesPhilodendron heterocraspedon Croat and D. C. Bay rare South American climbing aroid with elongated, veined foliage Philodendron heterocraspedon Croat and D. C. Bay is a scarce canopy climbing aroid from the rainforests of Colombia and Ecuador. Described in Aroideana (2006), it is recognised for its long, slightly undulating leaves with deeply impressed primary veins. In cultivation, this species responds to firm vertical support, bright filtered

Philodendron heterocraspedon Croat and D.C.Bay – rare South American climbing aroid with elongated, veined foliage

Philodendron heterocraspedon Croat and D.C.Bay is a scarce canopy-climbing aroid from the rainforests of Colombia and Ecuador. Described in Aroideana (2006), it is recognised for its long, slightly undulating leaves with deeply impressed primary veins. In cultivation, this species responds to firm vertical support, bright filtered light, and stable humidity with increasingly dramatic, well-textured foliage.

What makes Philodendron heterocraspedon unique

  • Leaf form: Elongated blades with a smooth matte-gloss finish, undulating margins, and distinct venation.
  • Climbing habit: Anchors to fibrous or moss-covered supports via aerial roots for vertical growth.
  • Ontogeny: Juvenile leaves are narrower with simpler form; mature foliage develops greater width, stronger venation, and margin undulation.
  • Collector appeal: Rarely seen in cultivation, valued for its upright growth and leaf architecture.

From South America’s canopy to your collection

Native to wet lowland and lower montane forests in Colombia and Ecuador, typically between 100 – 800 m elevation. P. heterocraspedon climbs large tree trunks in filtered to low canopy light, benefiting from constant moisture, warm temperatures, and moving air. In situ, its leaves are adapted to intercept dappled sunlight while minimising water loss.

How Philodendron heterocraspedon differs from similar narrow-leaf species

Compared to Philodendron elongatum, heterocraspedon shows more pronounced primary venation and slightly more undulate leaf margins. Unlike P. atabapoense, it lacks the pronounced bicolour contrast between the adaxial (upper) and abaxial (lower) leaf surfaces. It can resemble juvenile P. pedatum, but heterocraspedon maintains a narrower, more elongated blade shape into maturity.

Size and form at dispatch

  • Pot size: 12 – 15 cm nursery pot
  • Approximate height: 25 – 40 cm excluding support
  • Leaf count: Typically 4 – 7 leaves; size varies with growth stage

Images may depict mature plants. Shipped specimens may have smaller juvenile leaves; with strong light, humidity, and a firm pole, foliage will gradually increase in size and complexity. Newly shipped plants may pause growth temporarily while acclimating.

Care guide – keeping Philodendron heterocraspedon thriving

  • Light: Bright, indirect light encourages compact internodes and strong venation; avoid harsh midday sun.
  • Water: Water when the top 2 – 3 cm of substrate are dry; fully saturate, then allow excess to drain.
  • Humidity: Best above 60%; stable high humidity supports larger leaves and better texture.
  • Temperature: Ideal 18 – 28 °C; avoid prolonged drops below 15 °C.
  • Substrate: Airy aroid blend (~35% fine orchid bark, 25% coco coir, 20% perlite/pumice, 10% compost, 10% horticultural charcoal).
  • Feeding: Balanced liquid fertiliser at 25 – 50% label rate every 4 – 6 weeks during active growth.
  • Support: Moss or fibre poles provide texture for aerial root adhesion; secure the stem at each node.

Propagation and growth notes

  • Propagation: Stem cuttings with at least one node and root nub; root in moist sphagnum, airy substrate, or semi-hydro with nutrient solution.
  • Growth rate: Moderate; faster with bright light, warm temperatures, and regular feeding.
  • Hydroponics: Adapts to semi-hydroponic systems if transitioned gradually.

Flowering and inflorescence

Mature plants produce a greenish to pale spathe enclosing a spadix, typical of Philodendron. While ornamental value is minor compared to foliage, flowering indoors is possible in stable, long-term culture.

Common issues and solutions

  • Yellowing leaves: Usually linked to overwatering or compacted substrate; improve drainage and adjust watering frequency.
  • Slow or stunted growth: Increase light (still indirect) and ensure firm pole contact at each node.
  • Pests: Watch for thrips, spider mites, and mealybugs; treat promptly with targeted controls.

Science-based notes

  • Venation function: Prominent primary veins facilitate water transport in long, narrow blades.
  • Ontogeny: Morphological shift from narrow juvenile leaves to more textured mature blades occurs progressively with climbing height.
  • Ecological role: Adds vertical structure in rainforest understories, offering microhabitats for invertebrates.

Etymology

Philodendron derives from Greek phílos (“loving”) and déndron (“tree”), referring to its climbing nature. The species epithet heterocraspedon comes from Greek for “different edge,” referencing variation in the leaf margins.

Order Philodendron heterocraspedon

Add Philodendron heterocraspedon to your collection for a rare canopy climber with elegant, elongated foliage. With stable humidity, bright filtered light, and firm support, this species will reward you with increasingly architectural leaves over time.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 83752046738

Discover Niche Categories That Outsell philodendron heterocraspedon for sale

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 2402 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
Rodney Hahn
Lowell, US
★★★★★ 5
Works like a champ!
Size: Full-size Truck, SUV
It works great! I had one fairly slow leak and 2 very slow leaks. 3 Tires. 2 were on my 94 Ford Ranger. I put a little more than 1/2 the packet in my fastest leaking tire (on the Ranger) and about 1/4 of the packet in the 2nd tire of the same vehicle. Lastly, I put the final 1/4 in a very slow leaking tire on my 2000 Ford F-150. All tires have stopped leaking!! I am delighted with the effectiveness of this product!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
J
Verified Purchase
Jim
Belleville, US
★★★★★ 4
Seems to have done a great job.
Size: Full-size Truck, SUV (2-pack)
One of our cars has suffered from rim leaks and was driving me nuts. Constantly being asked by my wife to top off the tires on her car. When I replaced a damaged rim I asked the tire shop to look for the source of the leaks. They said the "alloy" rims had started to corrode and did their best to get them to seal but warned me they would likely leak again. This spring when I removed her snow tires I found 3 of her 4 tires had gone completely flat in storage. The fourth was the new rim which was fine. I considered buying new rims that won't have this problem but wanted to wait until her times need to be replaced. The batteries in the TPMS sensors are getting very low so likely these will need to be replaced as well. I thought to try some sort of sealant. Most of the products I saw were not rated for automotive systems and offered warnings about risk to the TMPS sensors. This seemed to be the only product rated for my application and claimed it would not harm our car's sensors. So I gave it a shot. I ordered the SUV package that came with an injector and two 8-oz bottles. I put 4 oz in each tire per the instructions. Overall the process was easy except the valve core extractor broken on one of the tires. I had to pick up a replacement at a local auto parts store. Also, injecting the sealant creates a small amount of pressure in the tire that, if one doesn't release by drawing out the plunger, will burp a small amount of sealant onto the rims. Fairly easy to clean up with WARM water and easier to avoid after the first experience. Drove the car around at a variety of speeds for 10-15 minutes (had errands to run) and waited to see what happened. Great results. Weeks later and the tires still have the correct pressure. I am not sure how long this will last but hopefully for the remaining life of the tires at least. I took one star off for easy of use / easy to install because the valve core extractor is made of extremely cheap aluminum and I am sure others will have a poor experience with it. Be forewarned and consider buying one before you start jacking up your car and letting the air out of the tires only to find you break the tool on a sticky valve core and are unable to complete the job without a trip to the auto parts store. I'll update this review in about a year to report on the long-term outlook for this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 20, 2023
T
Verified Purchase
Team Ohio
Grantham, US
★★★★★ 5
It Works!
Size: Full-size Truck, SUV
When I bought my vehicle it didn't come with a spare. I knew what I was in for. I was on my way to an important meeting and as fate would have, the tire pressure indicator reported a flat. I imagined the worst but experienced the best! The directions said to let all the air out of tire and remove the valve stem core, it seemed like I was making a bad situation worse. Then it said to attach the tube to the stem and squeeze the contents into the tire. I thought "this is never going to work" the fluid seemed too watery to seal anything, but I followed instructions, I reinstalled the valve core and reinflated the tire, and it worked! I expected it to leak immediately, it didn't. It lasted all day and most of the next day until I could get the tire to the shop. They removed a nail and patched the hole, overall I'm very satisfied, I bought a replacement right away, just in case!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
T
Verified Purchase
Terry Justice
Phoenix, US
★★★★★ 5
Better than the green goo
Size: Full-size Truck, SUV (2-pack)
Recently, while I was at work, I noticed that I had at some point run over a nail with my car. Normally, you'd take your car to the tire shop and let them plug the hole for you. Well, the only problem was that the nail decided that it was going to poke my tire where the sidewall meets the tread, and most shops will refuse to plug a tire when it's punctured there. Makes sense, it's a liability issue for them, so I can't blame them. That still leaves me with the problem of having a tire with a nail in it. So, I could either replace the tire with either a new or used tire, which is expensive or I can try using a sealant to try and get as many miles out of my tire as I can. In the past, I had tried using the green goo sealant on nail holes, and while it works to get you 15 miles down the road, that's about it. Now, while TireJect doesn't recommend using their product on punctures on the shoulder of the tire, I decided that I'd give it a try to see if it would work. And as of writing this review, it's been about 10 days since I put TireJect in my tire, and so far, it hasn't leaked any air, despite it not being meant for the shoulder. When money isn't so tight, I'll probably go ahead and replace the tire, especially since there's only about 4/32 tread depth left, but for the time being, I'll keep running it, and hopefully it keeps holding pressure properly like it has been. Now, as for how easy it is to use, the only tools you will need that aren't provided, is an air compressor to allow you to re-inflate the tire. The kit comes with everything else you will need, including a valve core removal tool and a syringe to add the sealant to your tire. To use this product, you will first need to carefully remove the valve core with the provided tool, careful not to lose the core, since it doesn't come with a replacement core. After that, thread the hose on the syringe on to your valve stem, and then carefully add the required amount of sealant to the syringe. If you accidentally spill some, wipe it off before it dries, so that it doesn't stain anything. From there, just push the goo into the tire with the plunger, adding more to the syringe as necessary. When you're all done, re-install the valve core into the valve stem snuggly, careful not to over-tighten, and air up the tire to the recommended PSI with your compressor. After all that is done, go take a short, slow drive to distribute the sealant, and then recheck your air pressure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 29, 2025
T
Verified Purchase
Tony Nowikowski
West Palm Beach, US
★★★★★ 1
TPMS Compatability is a LIE
Size: Sedan, Crossover, Small Truck
2018 Subaru Impreza, with one tire with a slow leak (about 2 PSI a week) that I couldn't trace. I bought the "Full-Size Sedan, Small Truck, Crossover" kit (the 6 oz. pouch) based on my tire size, 225/40/18. After I removed the valve core, attached the dispensing hose and opened the cap, the product would not flow into the tire. I squeezed the pouch, but that only made the product leak out around the valve stem onto the wheel and driveway. I tried rotating the tire so the valve stem was at the top, and and also at the bottom. I even took the wheel off so I could get a fully vertical flow. Nothing worked. I finally gave up after only about half the product was dispensed, and I do think most of it went somewhere other than in the tire. I reinstalled the valve core, remounted the wheel, plugged in my little lighter socket-powered compresseor, and tried to inflate the tire. And ... NOTHING. The pressure reading on the compressor immediately shot up to over 100 PSI, and it automatically shut off. Tried multiple times, with the same result. I again removed the valve core, and a) no air came out of the tire when I removed it, and b) even with no valve core the compressor still would not pump air into the tire. Clearly the gunk had completely blocked the valve/TPMS. Fortunately, when I took the tire to Costco (where I'd bought it), they were able to fix the damage I'd done, as well as patching a small nail hole in the tread I hadn't seen (that was clearly the source of the slow leak) for no charge. Since I've already submitted a refund request, ultimately all it really cost me was my time and effort ... and a whole lot of stress.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2024

recommand products