SKU: 76034303409
nicosulfuron herbicide

nicosulfuron herbicide Shot Gun 26OD Nicosulfuron + Atrazine + Mesotrione Herbicide – IR Farm

Sale price$22.47 Regular price$24.97
Save 10%

Pay in installments of $6.24 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 18 - Jul 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

nicosulfuron herbicide Shot Gun 26OD Nicosulfuron + Atrazine + Mesotrione Herbicide – IR FarmShot Gun 26OD Nicosulfuron + Atrazine + Mesotrione Herbicide Tara Group Of Pakistan Shot Gun 26OD, a highly effective herbicide meticulously crafted to combat a broad spectrum of both broadleaf (BL) and narrowleaf (NL) weeds in maize fields. Shot Gun 26OD is a potent herbicide designed for the effective management of troublesome weeds that plague maize crops. It combines three powerful active ingredients, each serving a specific purpose, to deliver an

Shot Gun 26OD Nicosulfuron + Atrazine + Mesotrione Herbicide Tara Group Of Pakistan

Shot Gun 26OD, a highly effective herbicide meticulously crafted to combat a broad spectrum of both broadleaf (BL) and narrowleaf (NL) weeds in maize fields. Shot Gun 26OD is a potent herbicide designed for the effective management of troublesome weeds that plague maize crops.

It combines three powerful active ingredients, each serving a specific purpose, to deliver an unparalleled weed control solution.

The Triple Threat: Active Ingredients

Active Ingredient

Concentration

Mode of Action

Target Weeds

Nicosulfuron

2%

Systemic

Johnsongrass, Sorghum halepense, Kochia

Atrazine

20%

Pre-emergence/Post-emergence

Annual broadleaf weeds, certain grasses

Mesotrione

4%

Broad-spectrum

Both broadleaf and narrowleaf weeds, including resistant species

  1. Nicosulfuron (2%): This systemic herbicide disrupts the synthesis of amino acids in weeds, leading to stunted growth and eventual death. It’s particularly effective against tough weeds such as Johnsongrass and Kochia.

  2. Atrazine (20%): A well-established herbicide, Atrazine inhibits the photosynthesis process in weeds. This causes them to effectively starve and die, making it especially efficient against annual broadleaf weeds and some grasses.

  3. Mesotrione (4%): Known for its broad-spectrum action, Mesotrione works by disrupting the integrity of weed cell membranes, leading to rapid desiccation and death. It efficiently controls both broadleaf and narrowleaf weeds, including some resistant species.

Dominating The Battlefield: Key Features

  • Dose: At a recommended application rate of 800 ml/acre, it delivers a concentrated dose for maximum weed control.

  • Spectrum: No weed is safe from this triple threat. Shot Gun 26OD effectively manages both broadleaf and narrowleaf weeds, ensuring your maize field remains weed-free and thriving.

  • Mode of Action: The systemic action of Shot Gun 26OD means that the herbicide is absorbed by the weed, spreading throughout its vascular system to eliminate it from the inside out. This results in long-lasting control while minimizing soil disruption.

Beyond the Basics: Formulation And Application

  • 26OD Formulation: This concentrated formulation ensures efficient mixing and application, saving farmers valuable time and effort.

  • Flexible Application: It can be applied at different stages of weed growth:

    • Pre-emergence: Before weeds germinate.

    • Early Post-emergence: When weeds have emerged but are still small.

    • Directed Post-emergence: Targeting specific weeds without harming the maize crop.

  • Maize Compatibility: Formulated specifically for maize, Shot Gun 26OD effectively controls weeds while being gentle on your crops.

Benefits Of Using Shot Gun 26OD

  1. Enhanced Crop Yields: By effectively controlling weeds, it allows maize crops to thrive without competition, leading to improved yields.

  2. Long-lasting Control: The systemic action ensures weeds are eliminated from the root up, providing long-term control and reducing the need for multiple applications.

  3. Reduced Soil Disturbance: The targeted action of the herbicide minimizes disruption to the soil, preserving its health and structure.

How To Apply Shot Gun 26OD?

Application Guidelines

To achieve optimal results with Shot Gun, follow these guidelines:

Stage of Application

Recommended Timing

Application Rate

Pre-emergence

Before weed germination

800 ml/acre

Early Post-emergence

Weeds are small, usually 1-3 inches

800 ml/acre

Directed Post-emergence

When maize is established, targeting specific weeds

800 ml/acre

Frequently Asked Questions

What types of weeds does Shot Gun control?

Shot Gun 26OD effectively targets a wide range of broadleaf and narrowleaf weeds, including tough species like Johnsongrass, Sorghum halepense, and Kochia.

Can Shot Gun 26OD harm my maize crop?

No, Shot Gun 26OD is specifically formulated for maize and, when applied according to label instructions, will not harm your crop.

What is the recommended dose for effective control?

The recommended application rate is 800 ml/acre to achieve maximum effectiveness.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 76034303409

Discover Niche Categories That Outsell nicosulfuron herbicide

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mark Kadrich
Lowell, US
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
J
Verified Purchase
Josh
Houston, US
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
W
Verified Purchase
william scott
Lexington, US
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
M
Verified Purchase
Mike
Lexington, US
★★★★★ 5
Great sound mat for the price!
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
P
Verified Purchase
Paul
Charlottesville, US
★★★★★ 5
Excellent sound deadening mats
Style: 80 mil 36 sqft, Style: 80 mil 36 sqft
Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026

recommand products