SKU: 66351991233
air plants bearded dragons

air plants bearded dragons Bearded Dragon Starter Plant Pack – The Bio Dude

$22.05 $24.50
Save 10%
No.2 Bestseller on www.kerrimatt.com >

Pay in installments of $6.12 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 20 - Jul 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

air plants bearded dragons Bearded Dragon Starter Plant Pack – The Bio DudePlants pictured may be switched to similar plants, due to availability. Plants included in the Plant Pack are listed below. A handpicked selection of The Dude's best desert plants for bearded dragons. The plants included in this kit are meant for your dragons to eat, climb, and perch on and will thrive in the BioDude Terra Sahara bioactive substrate (if you have larger, more mature, or multiple bearded dragons, you may want to consider The Dude's

Plants pictured may be switched to similar plants, due to availability. Plants included in the Plant Pack are listed below.

A handpicked selection of The Dude's best desert plants for bearded dragons. The plants included in this kit are meant for your dragons to eat, climb, and perch on and will thrive in the BioDude Terra Sahara bioactive substrate (if you have larger, more mature, or multiple bearded dragons, you may want to consider The Dude's Bearded Dragon Plant Pack V2 as an alternative to this starter plant pack). 

Bearded dragons, in general, are very active, robust lizards that will readily enjoy foraging and working for their food if the challenge is present. These plants can handle the dragon's weight and nails, and can be eaten to a stump, only to regrow if properly maintained. All plants are grown 100% organically with no pesticides or herbicides. 

Included in this kit is:

  • 3" pot - Dude's Choice Arid plant (assorted aloe, gasteria, or haworthia)
  • 4" pot - Aloe, crassula, or elephant feed plant 
  • 6" pot - Opuntia cactus, spineless 

Opuntia cacti are naturally high in calcium and minerals, and also have a high moisture content. which makes them a great snack for your dragon. With their thick protective skin it will take your dragon some work to get this cacti down to the stump. These cacti are spineless and 100% harmless to your dragon. *Please Note: Opuntia plants are shipped bare root, wrapped in paper and packaged individually when ordered.

Elephant feed plants are another great addition to your dragon's enclosure. Growing very quickly with proper lighting, these plants can grow sideways, upwards, downwards, and creep over your woods, giving your vivarium a deeper look. Not only are they 100% safe if ingested, these plants are high in moisture.  They are also very sturdy and, once established, can become small shrubs for your dragons to rest and bask on. 

Aloe is a great addition to your vivarium as they are very easy to grow, can handle a beating, and are 100% safe if ingested. Aloe has been known to cause the stool to have a slightly higher moisture content due to its fibrous consistency. 

It is also recommended to plant more healthy edibles in with your dragons. Mint, basil, oregano, rosemary, hibiscus, kale, and lettuce are all examples of plants you can establish in your vivarium to give your terrarium a nice clean smell while providing natural food and enrichment for your dragon (these additional plants may require different moisture/watering levels than those included in this kit). 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 66351991233

Discover Niche Categories That Outsell air plants bearded dragons

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Amazon Customer
Belleville, US
★★★★★ 5
Decent copper clad aluminum
Size: 14AWG-50FT
If you want the best wire, you should probably go with pure copper wire. It is more expensive but conducts better and thus is more efficient and less likely to heat up. If you are doing a low power, short run of cable, however, this wire should serve your purposes well. My purposes for such wire are varied. I am a licensed ham, like to build circuits, and have an electrical engineering degree. Depending on the specific tasks I'm on, some I'll gladly use this wire, others I'll go with pure copper. In comparison to other similar copper clad aluminum wire I've used in the past, the wire is pretty flexible and easy to work with. I also prefer the softer insulation like this has. You need to fit the wire to the job but if you have the job this is right for, it'll serve you well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2024
H
Ham and Cheese
Boise, US
★★★★★ 5
good wire for the price
Size: 14AWG-50FT
This speaker wire is of good quality. I don’t know what to say about it besides that its 14 gauge, which is a bit on the thick side, but good for getting high quality sound or for doing long runs of cable. Its not pure copper, but that's not really necessary unless you are an audiophile and even then, i wonder if its really noticeable. The 50 feet it comes with is enough for a 5.1 surround system, as long as your speakers aren’t too far away. I haven't noticed any weird sounds from my system after setting it up with this cable. The housing is relatively thick but not shielded, so I was careful to keep it away from power cords. All in all this is good cable, especially for the price, and I would purchase it again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2024
O
Old Nerd
Fort Morgan, US
★★★★★ 4
Not as good as pure copper, but maybe good enough
Size: 14AWG-50FT, Size: 14AWG-50FT
This wire is copper-clad aluminum, which means you sacrifice some conductivity for a for a less expensive conductor. This wire is very lightly clad with copper - the thinness of the copper coating is obvious from a casual observation (see image). I measured 4-wire resistance across the entire length (50') of wire - it comes out to 0.34 ohms on each lead. This is a bit less than double what you'd expect from an equivalent length of the same gauge of multistrand copper, so if you're planning on running a long length of this it might be prudent to pretend that you're working with a slightly smaller gauge than you actually are. That is exactly the approach I'm taking with it, and it works well for me within that context.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2024
T
Too frequent buyer
Chelsea, US
★★★★★ 5
Great speaker wire
Size: 14AWG-50FT
I ordered this speaker wire to replace my speakers in my car. I highly appreciated that there are 50' included on this spool, it's perfect for rewiring the stereo speakers in a car (or house). The wire appears to be made well and is the correct gauge. The sound quality is great with my new speakers, and I am highly impressed. I recommend this speaker wire to others, it's exactly what I needed and has met my expectations for high quality speaker wire.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2024
R
RWells
Grantham, US
★★★★★ 3
Higher resistance than expected
Size: 14AWG-50FT, Size: 14AWG-50FT
I like Nilight products, I really do, but this one isn’t as good as it could be. After reading other reviews I wanted to take a different test approach and measure the resistance of the whole roll. I thought this might explain the low rating of 5.6A at 12V. I believe my test explains this rating. First, you need to make sure you understand that this is copper clad aluminum. It is clear in the ad title but make sure you are good with that. The test consisted of me removing the entire 50 feet of wire from the spool to reach the other end. I then stripped back the end and tied the two together securely. Only soldering would have produced a more complete contact. I then tested the resistance of the roll with an Agilent U251B multimeter which gave the reading in the pic of .75ohms. That’s not much but compared to what I found on several charts that was high. The average resistance of 14 gauge 41 strand copper wire should be 2.63ohms per 1000 feet or .1315 per 50 feet. The wire tested 5.7 times greater resistance. Obviously aluminum will test with more resistance than pure copper but I was unable to find what those values should be. The insulation is thick and durable so abrasion wear shouldn’t be an issue if routed properly. The wire may still be great for your application but if you are considering pushing this wire to the load limit you may want to upsize to 12 gauge.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 27, 2024

recommand products

GT2012
24.76
8003/4 | Replacement Spray Nozzle Set
23.94
Best Natural Bug Spray for Golf & the Beach Lemongrass & Basil
20.19
Pump Up Sprayer — Mosquito Repellent for Yard
26.55
FANHAO High Power Adjustable Fireman Style Garden Hose Nozzle
29.84