Pay in installments of $6.60 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
lights for growing plants in houses Hanging Grow Light String(US/CA ONLY) CA 120V / 2-packKey Features: IP65 WATERPROOF PLANT GROWER LIGHTS: The hanging plant grow lights are IP65 waterproof and have undergone rigorous waterproof testing. They are recommended for use in areas prone to moisture, such as greenhouse, balconies, hallways, and patios (do not use in heavy rain or typhoons, as this will reduce bulb life). Please note that the bulbs must be tightened completely so that the base is not exposed. FULL SPECTRUM+660NM SUPPLEMENTAL
Key Features:
- IP65 WATERPROOF PLANT GROWER LIGHTS: The hanging plant grow lights are IP65 waterproof and have undergone rigorous waterproof testing. They are recommended for use in areas prone to moisture, such as greenhouse, balconies, hallways, and patios (do not use in heavy rain or typhoons, as this will reduce bulb life). Please note that the bulbs must be tightened completely so that the base is not exposed.
- FULL SPECTRUM+660NM SUPPLEMENTAL LIGHT: Customized red and white full spectrum, realize a more ideal full life cycle full spectrum supplementary light program, covering the entire visible spectrum of 400nm-780nm; And Red light helps to flower and fruit and prolong flowering, Increase production. With MAX PPFD 302 μmol/s/㎡ @ 1ft, give plants more supplementary light.
- EASY to INSTALL: The upgraded lens makes the string light effect more effective and allows your plants to grow more vigorously..Sansi waterproof grow lights for indoor plants with hooks, you can fix the grow lights for indoor plants anywhere and adjust the position of the light string worry-free. If there is a problem with one of the light bulbs, the outdoor grow lights waterproof will not affect its use.
- PATENTED COC TECHNOLOGY: Chip on Ceramic, SANSI's patented technology replaces the traditional Mcpcb aluminum substrate with a non-conductive ceramic heat sink, and directly solders the LED chip on the ceramic heat sink, effectively reducing the system thermal resistance between the LED PN junction and the surface of the heat sink, resulting in faster heat conduction and higher product reliability, makes the SANSI bulb has higher light efficiency.
- GUARANTEES: SANSI's patented ceramic technology not only improves light efficiency, but also extends the life of the bulb to 25,000 hours. please feel free to contact us if you have any questions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great.
This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over.
It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement.
It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way.
Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
★★★★★ 4
Good product
Model: 36 SqFt(3.4 SqM)
Easy to roll out. Works great
Why did you pick this product vs others?:
Fair price for the amount of coverage, good quality
Works well:
Easy to install, rolls out great. Forms to contours well
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2025
★★★★★ 5
Great product
Model: 36 SqFt(3.4 SqM)
I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
★★★★★ 5
Great product - Add foam product for complete solution
Model: 36 SqFt(3.4 SqM)
Used in two cars with speaker upgrades. Easy to install but get the roller for assured adhesion.removes "tinnyness" from large metal resonators. Use with foam absorptive material for a complete system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026