SKU: 60069628945
flat wall hanging planter

flat wall hanging planter Half Moon Ripple Wall Planter – Stylish, Durable, Eco-Friendly, Modern Design, Indoor & Outdoor Use, Multiple Sizes & Colors, Space-Saving, Vertical

$19.14 $21.27
Save 10%
No.2 Bestseller on www.kerrimatt.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

flat wall hanging planter Half Moon Ripple Wall Planter – Stylish, Durable, Eco-Friendly, Modern Design, Indoor & Outdoor Use, Multiple Sizes & Colors, Space-Saving, VerticalMid century modern ripple design 3d printed planter made with high quality, eco friendly plant based materials. Great for indoor houseplants. Take the stress out of the day with unique plant pots that not only look great, but are good for your plants too! These wall planters are recyclable and bio degradable although they will last for years. Hanging planters are great for adding a special touch to that wall youre not quite sure what to do with. Our

Mid-century modern ripple design 3d printed planter made with high quality, eco-friendly plant based materials. Great for indoor houseplants. Take the stress out of the day with unique plant pots that not only look great, but are good for your plants too! These wall planters are recyclable and bio-degradable although they will last for years. Hanging planters are great for adding a special touch to that wall you’re not quite sure what to do with.

🌧️Our planters feature a superior drainage system with 35 carefully placed openings, allowing for maximum water flow and preventing any risk of overwatering. Experience the ultimate in plant care technology with our innovative planter design. 🌧️

Reg - 6x3.25x4
Lrg - 7x3.7x4.5
Xl - 8x5x5
XXL - 10 x 6 x 6

Enjoy our Matte color selection for an elevated look. The Rainbow color will vary depending on size of planter. If you would like a specific coloration please leave 2 colors in the notes!

3D printed planters are a great addition for your plant. The material is porous allowing for great breathability and aeration.

Our planters are 3D printed with high-quality PLA - a type of thermoplastic polymer derived from Upcycled materials like Corn, Beets, and Wheat Grass. PLA is 100% biodegradable, recyclable and compostable!

PLA Is very strong and sturdy. Sudden bumps or falls will not harm these planters as they are designe to withstand unexpected life happenings.

Our goal is to make sure every planter has minimal layer lines and surface imperfections. We only ship planters we would be proud to plant in.

Returns and Exchanges are accepted up to 14 days of delivery. Easily replace if it’s not the color or size you were looking for.

Some images are Digital Renders. Actual product may vary, slightly.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 60069628945

Discover Niche Categories That Outsell flat wall hanging planter

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 2093 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mary C. Lucking
Lake Worth, US
★★★★★ 5
PASSED MY INSPECTION! THIS PRODUCT WORKS LIKE A MIRACLE DONT HESITATE TO BUY IT!
Inspection on my car due the end of January! My check engine light was coming on so I checked with a code reader & found it was a P0420. Read about the Catalytic Converter System possibly being in need of replacement or perhaps clogged. I am a woman, and know next to ZERO about cars, but I can read. Did investigate and found that the replacement of a Catalytic Converter system is mad expensive- also found this Moly Cleaner to add to gas tank. I'm not going to lie; I was nervous as I have a Kia Rio 2014 that has a very small gas tank and gets great gas mileage. In reading the consensus seemed to be to add to 1/4 tank of gas and drive fast for good periods of time to blow out the clog (if it was a clog). Did I mention I live in NYC and driving for long periods of time at high speeds can be a problem because of terrible traffic. Anyhow, this Saturday I poured the can into my 1/2 filled tank and hit a parkway near my home early morning. I did drive for 45 miles sometimes at 80mph then 60mph but tried to do it for a good few minutes at a time without getting pulled over. Checked my reader again, and it was not quite ready but the engine light did stay off. Next day, drove to work, stuck in traffic somewhat & never made it over 20mph & checked my reader again- all good to go for inspection. Went last night- my car PASSED and got that sticker in my window- so I am good for another year. The BEST money I have spent all year. Thank you for carrying this product! Saved me thousands! DONT HESITATE TO USE THIS. The hardest part for me was removing the cap on the can!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 13, 2026
C
Verified Purchase
CLEVEinCR
Waukegan, US
★★★★★ 5
Great stuff
Seemed to work as well as or better than some more expensive catalytic converter cleaners. I put it in while at 1/3 tank and my Check Engine light went out almost immediately once I started driving. My Tundra has almost 230,000 miles and still runs great but was getting a little harder to start after I switched from full synthetic oil to conventional. I’ll never do that again and immediately switched back but the damage was done. Check engine light came on and I had to crank longer to get it started. Adding this Liquid Moly fixed both issues temporarily. I have to wonder if this was used regularly, say every 3 months, if it would clean the catalytic converter more permanently?
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2025
J
Verified Purchase
Jon.
Alexandria, US
★★★★★ 3
Ehh??
Didn't work for my on my 17 hyundai accent with 90k on it. I poured the whole bottle in with a half tank of gas. And went for a 3 day italian tune up.... no dice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
J
Verified Purchase
Juan Gonzalez
Alexandria, US
★★★★★ 5
Works great
Follow instructions and it will work. Had a p420 code, caught it early used this. No more code and passed emissions
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
A
Verified Purchase
A regular Joe
Alexandria, US
★★★★★ 5
Nice Filter Wrench for my Volvo V70XC!
Size: 86mm x 16
I was needing a filter wrench for my 2001 Volvo V70XC and couldn't find anything that fit from the local auto parts stores. Not knowing what to expect, I took a chance on this one since most of the reviews were 5 star and the price was exceptional. When I received it, I was quite pleased with the construction and finish. I have a brand new oil filter housing for my Volvo (since the one currently on my car is chewed up from the former owner using slip-jaw pliers or something on it) and the fit is perfect! I have worked as a mechanic my whole life (aircraft & automotive), and spent a couple of years as a technician at an automotive dealership and I can say that the tool looks like it is designed for heavy-duty use. The stamped steel housing is thicker than those found in local auto parts stores and the drive adapter has a thick arc welded bead along the inside of the tool. So, it appears to be made to hold up to some fairly heavy torque. Although the product description states that it is 1/2", the drive adapter is actually made for direct attachment to a 3/8" drive. Perhaps this error stems from the fact that they offer a much larger wrench (118-131mm) and this is a more accurate description of their other offerings. The 3/8" drive adapter works perfectly and a 21mm socket fits nicely on the external hex. Fits with SAE sizes are a mixed bag, though. I was able to attach a 13/16" 12-pt. box-end wrench, but not the opposing open-end. A similarly sized 13/16" 6-pt. socket was extremely tight, so I wouldn't recommend this size and would just go with the 21mm if you had to use the external hex. Otherwise, just use the 3/8" drive adapter for easiest use of this tool. The adapter also incorporates ball detents on all four sides of the internal 3/8" drive, so your ratchet or extension won't easily fall off while in use. Since this tool is made for oil filter removal & installation, I'm sure that it will deliver as promised. I'll post an update after my next oil change and I get a chance to use it and install the new filter housing I have.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2014

recommand products

Mystery Succulent Subscription Box
29.27
Panda Kalanchoe Tomentosa
22.72
Crown of Thorns ‘Cheetah’ For Sale – Logee's Plants
21.69
Panda Plant
29.50
Panda Plant 'Kalanchoe tomentosa'
28.10