Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 11 - Jul 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex gazelle rain cover CYBEX GoldMost out of stock colors are available in store within a week. Please contact us at hello@inlandmama. com 208. 718. 2678 to order an out of stock color. The CYBEX Gazelle S is the ideal first stroller that includes a removable shopping basket with an impressive additional carrying capacity of 25 lbs. Adapting to the changing needs of your family, the Gazelle S can easily convert from a single to a double stroller without additional adapters. Designed
Most out of stock colors are available in store within a week. Please contact us at [email protected]/208.718.2678 to order an out of stock color.
The CYBEX Gazelle S is the ideal first stroller that includes a removable shopping basket with an impressive additional carrying capacity of 25 lbs. Adapting to the changing needs of your family, the Gazelle S can easily convert from a single to a double stroller without additional adapters. Designed to support 20+ different configurations, the Gazelle S includes a near-flat reclining reversible seat and is compatible with our Gazelle S Cot and all CYBEX Infant car seats for use from birth. Add the optional kid board (sold separately) to accommodate 3 children. Endless opportunities for your growing family!
Features:
-
Easily converts from a single to double stroller without additional adapters
-
Folds with two seat units attached to the frame
-
One-Pull Harness: Our user-friendly harness system makes securing your child in the seat a breeze with one simple pull – no fuss and extra handy if you’re doing it twice.
-
Independent reclining seat back and leg adjustments offer multiple configurations, allowing you to position your child for comfort
-
Supports 20+ configurations using Gazelle S Seat units, Gazelle S Cots, CYBEX infant car seats or the removable Shopping Basket
-
Removable Shopping Basket provides extra storage up to 25 lbs.
- Extra-large, easy access lower basket for extra storage space while out on the go (30 lbs. max load)
- Premium design with a robust all-aluminum frame, leatherette handlebar and bumper bar, and high-quality fabrics
- All-wheel suspension with integrated frame shock absorption system provides a smooth ride over a variety of surfaces
- Streamlined fold for easy storage at home or in the car
- Extendable XXL sun canopy with mesh window and a UPF 50+ rating
- Large, reversible seat unit reclines to a near-flat position
- 50 lbs. weight capacity for each seat unit (second seat unit sold separately)
- One-hand, height-adjustable handlebar offers comfortable steering for all users
- Versatile 3-in-1 Travel System with the seat unit, Gazelle S Cot (sold separately), and any CYBEX infant car seat (sold separately) using the included adapters
- Stroller compatible with CYBEX, Maxi-Cosi® Mico 30 and Nuna PIPA™ infant car seats using the included adapters
- Additional adapters sold separately for: BRITAX® B-Safe 35, BRITAX® B-Safe 35 Elite, BRITAX® Endeavours, Graco® SnugRide® 30/35, Graco® SnugRide® SnugLock® 30/35, Chicco® KeyFit® 30, Peg Perego® Primo Viaggio 4-35. Please contact ParentLink for additional compatibility information.
- Includes: stroller frame, 1 seat unit with bumper bar, shopping basket, rain cover, cup holder and car seat adapters
- Additional accessories available for purchase: Gazelle S Second Seat, Gazelle S Cot, Gazelle S Kid Board, Snack Tray, Parasol, Summer Seat Liner
- Measurements Assembled: 41.9” L x 25.4” W x 43.3” H
- Measurements Folded (with wheels): 32.9” L x 25.4” W x 12.2” H Weight: 28.4 lbs. (excludes shopping basket)
- Use from birth with Gazelle S Cot or infant car seat. Seat unit suitable from 3 months to 50 lbs.
Tech Specs:
- Age Range: Use from birth with Gazelle S Cot or Infant Car Seat (sold separately). Seat unit suitable from 3 months to 50 lbs.
- Weight (in single mode): Max. child weight 50 lbs.
- Weight (in duo mode): Max child weight for each toddler seat: 50lbs.
The All-in-One Stroller
Whether you’re already thinking ahead to your second child or expecting the arrival of twins, you can be sure the Gazelle S modular stroller has the ideal set-up for your future family. Choose from over 20 configurations of Gazelle cots, infant car seats, or stroller seats to create the perfect fit.
Transport one or two children with ease. The Gazelle S features a compact fold with either one or two seats attached, allowing for easy storage at home or in the trunk of your car. Whatever your plans for the day, you can rely on a huge lower basket and a detachable shopper basket to carry up to 55 lbs. of shopping bags, groceries, or your child’s essentials. And a one-pull harness lets you secure your child in seconds – especially handy if you’re strapping in two kids!
With practically endless set-up possibilities, the Gazelle S is the family stroller that always has a solution.
Care instructions:
- Machine wash warm on gentle cycle; do not bleach; do not tumble dry; do not iron; do not dry clean
Compatible with:
- Summer Seat Liner
- Gazelle S Cot
- Gazelle S Seat Unit
- CYBEX infant car seats (with adapters)
- Gazelle S Kid Board
- 2in1 Cup Holder
- Stroller Cup Holder
- Snack Tray
- Platinum Footmuff
Features:
Ergonomic Near-Flat Position
Features a robust reversible seat unit that can be reclined easily to a near flat position.
XXL UPF50+ Sun Canopy
Protect your child from the weather with an extendable XXL Sun Canopy. Made of UPF50+ protective fabric, the canopy features a mesh window for breathability and healthy air circulation on hot days.
Spacious Stroller Basket
Carry up to 30 lbs in a super spacious basket. Add in the detachable shopper basket and this equals an unbeatable 55 lbs of capacity.
Adjustable Handlebar
The handlebar height can be easily adjusted with one hand, allowing you to find the perfect steering level for your own height.
Advanced Suspension
Front-wheel suspension combines with revolutionary frame-based rear suspension to deliver a new level of riding comfort.
Dimensions
- Length: 41.9 in
- Width: 25.4 in
- Height: 42.7 in
- Weight: 28.4 lbs
- Length: 32.9 in
- Width: 25.4 in
- Height: 12.2 in
- Weight: 28.4 lbs
- Length: 32.3 in
- Width: 26 in
- Height: 15.3 in
- Weight: 32.4 lbs
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 505 reviews
Sort
Product Reviews
★★★★★ 1
Don’t buy
Set name: K2 SE Combo, Set name: K2 SE Combo
This printer is pretty awesome. Here is the biggest catch to it. We have spent hundreds of dollars on the app and or validating what we could buy between buying filament and everything else. This thing does not connect properly. It is very technical if you are not smart. This is a terrible thing to buy. I’m a very educated person and so are the other 3 to 4 people in my household that have all tried to use this thing it will not let you change individuals to print off it and even the amount of money you spend to buy credit credits and or other items that you want to purchase in the store do not print properly. This sucks don’t buy it even though this equipment is awesome. This is the worst thing I wish I’d never bought. I do not say this in the test and or ignorance I have studied. I have read up. I’ve looked at forums. I’ve been on Reddit. Everyone says this creatality is extremely difficult and we have definitely found this out firsthand. I would definitely return this, but I think my window has closed. It sucks when you buy a product and you have it for like 2 to 3 weeks before you get to use it but then your window to return it is closed. The app does not match what is online and or if you have more than one person that wants to print, you cannot share unless the other person is logged out and even if the person is logged out, it does not always match the same, so for example, I have tons of money and credit on my account, but it will not let me print out certain apps and or creations then it tells me that it will work on our item that we have purchased, but then it’ll say it does not work. It will not print. 3-D printer is a scam. It sucks. It has great potential but this is not the one for you. Don’t waste your money too much money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2026
★★★★★ 5
Forget Adventurer 5M , This is the true and easy to use beginner machine
Set name: Ender 3 V3 SE
This is my 3rd 3d printer. Once I spent about 45 minutes assembling it has been printing nonstop since the amazon driver dropped it off, these are the best for reliability and perfect for hobbyists. It is not the quickest machine out there, but it makes up for it with a quality print good price as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 4
One - Month Review
Set name: Ender 3 V3 SE, Set name: Ender 3 V3 SE
First - I wrote a out of the box review - I do not know if this review will replace the old review or compliment it. Just in case this review replaces the old review - I will repeat a few of the important points from the previous review.
I must also say it helps a great deal if you are already familiar with Ender because about 80% or more of the machine is built the same way as the older models. If this is your first Ender - read the instructions and check to make sure you have all the parts. Placing the parts where you can easily tear open the bags and not having to search for a part cuts down the assembly time. While the assembled printer takes up a small footprint - give yourself room to work.
This is my 3rd printer - my first one I made from scratch. It took about 2 weeks to get it assembled and another two weeks to get it to print properly. Most of that time was spent modifying the Martin software so it would run my machine!
My second one was an Ender V1. It took me about 90 minutes to assemble and about 30 minutes to get it to work. Over the years - I modified it to the point it was virtually impossible to tell the difference between it and a V3. I replaced it because a least one of the motors was going bad and I did not want to do the repairs.
I picked this printer for 3 reasons 1) it was on sale, 2) I am now wheelchair bound and needed a printer that did not require too much assembly, and 3) I had worked with Ender before and knew how they worked. I was able to keep some of the old parts from the old machine (but threw most away).
Everything was packaged well, but the small parts are in plastic bags that you have to tear or cut open - so be careful you do not lose any parts! There are only three parts to be assembled. They are the base, the frame, and the screen. I had no trouble getting the machine together - did have some trouble getting it to work. I was never able to reach customer service which ranged between "Who are you Kidding?" and "Did you really expect any?"
I did some internet searching (there is lots of stuff out there - many are good YouTube videos). I found I needed to do an update - it got a bit complicated here. Part of the update was done using the hidden slot on the LEFT side of the removable screen and part was done using a SD card on the LEFT side of the Unit. (Ender does NOT tell you this on their website!). I was already angry when I tried their slicer and it did NOT work - after not being able to get customer service again. I deleted their slicer and used my Cura. After doing a few prints using Cura (which works fine) a couple days later, I reinstalled their slicer and did some troubleshooting - I found I had a setting wrong. I use both Cura and their slicer now because of the differences. Each one has some features the other one lacks.
One example: The Cura has a large number of preset configurations, and it is easy to save a custom configuration.
The Creality titles the g-code with a filename that includes the estimate print time.
I tried customer service and actually someone! They did give me the manual settings for generic Pla - when I asked how to save those settings they send me to a useless link. I will research how to save one day - but will use my Cura for generic pla until then.
What I like about the machine.
1} While it is nosier (a trade-off for higher speed) - it is still much quieter than the original Ender I had before modifications.
2)The new ribbon and print head are a big improvement. The filament is easier to change, and you can easily make prints with different colors! I do not miss the bowden tube and individual wires at all!
3) I like to put my prints on a card. The old machine used a micro-SD card - and I quicky bought an adapter! The new machine takes regular SD cards and no adapter is needed!
4) I really like the automatic leveling feature. There have been times I have spent hours getting my manual table set the way I wanted. So far - it has worked great. I have only made about 50 prints - so I cannot tell you how reliable it is in long term use.
5) The quality of prints is much better than my old machine. I am not sure whether this due to being a better machine or the stepper motor needing replacement.
What I do not like:
1) The SD card has to be put into its slot upside down.
2) The controls and the SD card slot are all on the left side of the printer. I think putting the computer connection and the SD card would have been much better on the front of the machine.
3) Updating is like putting up a Christmas tree. The firmware is done with a hidden C connector on the left side of the detachable screen (this is like putting up a Christmas tree). Fine details on display etc. are put in using the SD card (this is like putting the lights on the tree). Once you figure out what goes where - it is the easiest printer to update I have had.
4. This one is a mixed bag. I do not give their customer service good marks - but the fact I found solutions on the internet was a good thing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
★★★★★ 5
The K2 SE is a great entry level printer. Don't let the naysayers get you down!
Set name: K2 SE
I bought the K2 SE because it was inexpensive and I wanted to get into 3D printing. I had a Creality laser engraver that worked well, so I figured I'd go with the brand I knew. I bought the additional enclosure because I was planning to use this in the garage where my wood shop is, and I wanted to keep some dust out.
I have been pushing this thing pretty hard for three months now and it has not so much as looked at me cross eyed. It takes everything I throw at it. The quality seems to be there, as nothing is wearing out. I have a little superlube oil and grease to keep up the maintenance, and I suspect any failures people report have been on unmaintained machines. If you're the type that drives your car without changing the oil, 3D printing is not for you.
A quick note on 3D printing, for the uninitiated. When you see the one and two star reviews for the K2 SE, make sure you read why the reviewer is leaving the low rating. "Doesn't come with filament" - if you're not buying a combo with filament, none of the printers on the market come with filament. "Makes bubbles and pops when printing" - this is wet filament and not the fault of the printer (dry your filament). 3D printing is not a set it and forget it proposition, at least not at first. It requires a little skill (that can be built), a little knowledge (the U of Tube), and a little patience while you learn how to use the machine.
Now for the machine itself...
The print quality surprised me as a first time 3D printer user. I have purchased 3D printed items in the past and the lines were not something that impressed me. The K2 SE prints pretty much the same quality as the higher end Bambu Labs printers. The speed is all I could ask for, and I have fed this thing all kinds of PLA, PETG and TPU from Creality, Sunlu, Polymaker and AnyCubic without a problem. Any issues I have had have been the fault of the operator (me) not knowing I had to dry PETG before I use it. I have a Creality filament dryer now and dry my PETG right out of the package, then store it in an airtight container with dessicant. I have two printers running dried PETG sitting behind me right now and they're doing great.
If I have a single complaint about the K2 SE, it's the bed size. At 215 x 220 it's smaller than the industry "standard" of 256 x 256, and if you get some of the larger prints that are designed for a "standard" sized printer, they won't fit the build plate. But I knew that coming into this, because they advertise the size right up front.
Overall, I'm happy with the K2 SE. It was an excellent entry level printer and I have learned a lot from using it. I may even buy a second to add to my growing farm.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
Creality K1 SE - Prints great with stock settings - needs a side spool mount
Set name: K2 SE, Set name: K2 SE
I bought the Creality K1 SE a little over a week ago. I had an Ender 3 S1 before this printer. The K1 SE is so, so much easier to print with right out of the box! I definitely recommend it. It's a good way to get the improvements that were built into Creality's K1C, but at a nicer price. Plus, you can install your own version of Klipper if you want.
I've printed 10 or so things in PLA and PETG, and I haven't had any failed prints. The automatic bed leveling has just worked. I have not had any problems with bed adhesion. On the Ender 3 S1, I only used a textured PEI plate, but the smooth build plate on the K1 SE works fine. The extruder cooling fan also seems ok for what I've printed so far. I printed an overhang test and the 75 degree overhang looks fine, but it had trouble at 80 degrees. The bridging test looked ok. (The longest bridge was only 25 mm on that test however.)
I've put the printer in a soft-sided enclosure that I had used for my old Ender 3 S1. (It's easy to find similar encolsures.) The LEDs on the K1 SE are bright enough to see inside which is something that I was concerned about before I purchased. However, this enclosure makes it difficult to access the back of the printer where the filament spool is mounted, so I designed a mount that clamps onto the side-bar - see the pictures. The files are on Printables - "Creality K1 SE Side Spool Mount".
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2025