Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
money plant with white leaves Pilea peperomioides – Foliage FactoryPilea peperomioides Pilea peperomioides is the classic round leaved Pilea, with coin shaped green leaves held on slim petioles around an upright central stem. It grows compactly at first, then often develops a visible stem and small offsets around the base. As the plant matures, the leaf canopy can rise above the pot and the basal pups become easier to separate. Bright indirect light keeps the growth more even, while occasional rotation helps the
Pilea peperomioides
Pilea peperomioides is the classic round-leaved Pilea, with coin-shaped green leaves held on slim petioles around an upright central stem. It grows compactly at first, then often develops a visible stem and small offsets around the base.
As the plant matures, the leaf canopy can rise above the pot and the basal pups become easier to separate. Bright indirect light keeps the growth more even, while occasional rotation helps the leaves develop around the stem rather than leaning strongly to one side.
Round coin leaves on Pilea peperomioides
- Leaf shape: Round, peltate leaves attach near the centre, giving the plant its familiar coin-leaf form.
- Leaf colour: Fresh green leaves sit on slender petioles and create an open canopy.
- Growth habit: An upright central stem develops over time, often with basal pups around the parent plant.
- Propagation: Offsets can be separated once they have enough root growth of their own.
- Pot behaviour: A snug pot and airy substrate keep watering easier to control.
- Mature growth: Older plants can form a taller visible stem below the leaf canopy.
Growth and origin of Pilea peperomioides
Pilea peperomioides is native to parts of south-western China, including Yunnan and Sichuan. Indoors, it behaves as a compact, upright perennial that grows in bright filtered light and a substrate that dries partly between waterings.
The rounded leaves turn toward the strongest light source, so rotating the pot keeps the plant from leaning strongly to one side. Older plants may develop a taller bare stem below the leaf canopy, especially after leaf drop or low-light growth.
Care guide for Pilea peperomioides
- Light: Give bright indirect light. Too much direct sun can scorch leaves, while low light can stretch the stem and petioles.
- Watering: Let the upper part of the substrate dry before watering again. Yellowing and leaf drop often follow repeated overwatering.
- Humidity: Normal indoor humidity is usually enough, but very dry air can cause crisp leaf edges.
- Temperature: Keep it warm and stable, away from cold draughts and cold windowsills.
- Substrate: Use a free-draining houseplant mix with added aeration for the fine roots.
- Repotting: Repot when the root ball fills the pot or watering becomes difficult to manage.
- Feeding: Feed lightly during active growth. Skip fertiliser if the plant is stressed, recently repotted or growing slowly.
- Propagation: Remove pups when they have several leaves and visible roots, then pot them into a small airy mix.
Common issues with Pilea peperomioides
- Yellow leaves: Usually linked to wet substrate, poor drainage or watering before the pot has dried enough.
- Leaning growth: Caused by one-sided light. Rotate the pot regularly for a more balanced canopy.
- Crispy edges: Can come from drying too far, hot direct sun or very dry air.
- Leaf drop: Often follows stress from overwatering, cold draughts or sudden changes in light.
- Fungus gnats: More common when the substrate stays wet for too long.
- Pests: Check stems and leaf undersides for spider mites and mealybugs.
Safety for Pilea peperomioides
Pilea peperomioides is commonly treated as a pet-safe houseplant. Chewing can still cause mild stomach upset, so keep it away from pets that regularly bite leaves.
Botanical background for Pilea peperomioides
Pilea peperomioides was described by Friedrich Ludwig Diels in 1912. The species belongs to Urticaceae, and the epithet peperomioides refers to its resemblance to Peperomia.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 2062 reviews
Sort
Product Reviews
★★★★★ 5
Love this watch!
Beautiful watch, instantly one of my favorites and I own some that are worth many times what this one cost!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 11, 2025
★★★★★ 5
Excellent watch!
Rapid delivery and processing (domestic US). It's a Hamilton...I was surprised by the weight of this timepiece compared to my Seiko GMT. I love the 24-hour on the dial when dealing with military time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2024
★★★★★ 5
Such a beautiful watch!!!
What can I say. It's a Hamilton!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 4, 2024
★★★★★ 1
Great looking color scheme, but the same flaws as the other color variants of this model.
This review is for the 43mm white dial variant with blue ceramic bezel. Everything is built exactly the same as the black and blue variants other than the colors. I’ve already reviewed the black variant separately but updated the review for this white dial version.
Like probably 99% of watch enthusiasts, most of my watches have black or blue dials. Those are the most common/popular dial colors for a reason, they look good and they’re the most versatile. But because I already have so many of those, I find myself always on the lookout for a good looking white dial to add to the collection for a little variety.
And even more than just a white dial, I really love a red, white, and blue color scheme. I’m a patriot, proud to have served, and to rep our country’s colors anytime I can. It makes it even better that this watch is made by Hamilton, a brand with a rich US military history that has retained its American name, even if it’s no longer an American company and is now Swiss made and headquartered.
But out of all the different watches I’ve bought over the years, Hamilton has been the most frustrating. While it has made great strides in the last few years improving a lot of the things watch enthusiasts care about, such as higher end materials, improved designs, much better lume - there seems to always be at least one cheaply made part that disappoints.
Pros:
Great looking watch overall, it’s already hard enough to find a good looking white dial watch, let alone one with a red, white, and blue color scheme.
300m water resist (screw down caseback and crown).
Accurate and reliable automatic movement.
80 hr power reserve with antimagnetic Nivachron hairspring.
Thin for such a large and heavy watch with 300m water resist.
Very good lume.
Bracelet uses pins and collars for sizing, which is much more durable than cotter pins or screws. I never worry about a pin and collar system coming loose on a bracelet. A lot of bracelets on watches in this price tier, and some even higher (I’m talking to you, Mido and Longines!!!) are held together with cheap cotter/split pins.
Cons:
No date. The only people who prefer no date are watch collectors, and this is not a collector’s watch. For people who actually wear their watches daily, having the date or day/date is always preferable.
Bracelet is old fashioned and needs to be modernized. No quick release spring bars, and no on the fly adjusting clasp.
Pins and collars can be a little harder for some people to size, although I have no problems sizing and actually prefer them.
Powermatic 80 based movement can be more difficult for traditional watchmakers to service/regulate.
On the heavier side, but I’m used to even heavier watches, so it doesn’t bother me.
EXTREMELY CHEAPLY MADE LITTLE LUME PIP ON THE BEZEL THAT BREAKS OFF EASILY!!!
My measurements:
Weight, head only: 99g.
Weight, full bracelet: 116g.
Weight total: 215g.
43.8mm case diameter. 47.1mm including crown.
43.0mm at bezel.
33mm approximate dial diameter without bezel.
22.0mm lug width. Bracelet tapers to 20mm at the clasp.
52.0mm lug to lug.
12.8mm thick.
7.5mm diameter crown.
My wrist is 7.375” and 60mm across for reference in the pics.
I’ve had the watch for a few years now. The look/styling of the watch is great. It has some classic Hamilton military looks due to the 24 hour Arabic numerals, the kind of matte, textured white dial (more on that in a bit), and mostly brushed finishing on the case and bracelet, while retaining some polished bits for styling versatility. But this white version is definitely not as versatile as the black one. On the black one, the only pop of color is on the red tipped seconds hand. That one (depending on the strap you put on it) would look equally at home for military use on a rubber or nato, a T-shirt and jeans with any strap or bracelet, and even with a suit when paired with a dressier strap. This one has that same red tip on the seconds hand, but with its white dial, bright blue bezel, along with the polished, bright blue indices and handset - it looks much less serious. I think it would look fine with a T-shirt and jeans and up to business casual, but not much otherwise.
Regarding the dial, it’s much more interesting in person than you can tell in the pics. Nicely polished/finished blue indices and handset that turn an almost electric blue when hit by the light, but it’s the texture of the dial that I really like. I have no idea what it’s made of. The texture doesn’t look like it’s just from some kind of paint, it has a very subtle metallic sheen, almost like a very faint glitter. Maybe the best way to describe it would be if you were to take a shiny white metal and then sand it down to give it a matte finish, but you could still see hints of a glittery shine - that’s what it looks like.
Visibility is great too. In particular, I find white dial watches that use dark outlines for the hands and indices are the most clearly visible at a glance. Also, dive watches (or any watch with an outer rotating bezel) need to be larger like this one because those bezels take up a lot of the diameter. The lume is much stronger and longer lasting than on previous iterations. This one uses blue lume instead of the green on the black version, and seems to be almost as strong and long lasting, although the green always looks brighter to me in the dark. This lume is still visible on camera even at the two hour mark (and the camera has a much harder time picking up dim light than our eyes can when adjusted to the dark), which means it’ll be easily visible in the dark all night.
The antireflective (AR) coating is improved from older models and helps reduce some glare, but there are some angles you’ll find it difficult to see the time. Out of those two, the lume is definitely more important in everyday life. A good AR coating is a bonus, but less of a priority, especially at this price tier.
The movement is also great, again especially at this tier. The Powermatic 80 movement is always reliable. 80 hr power reserve, laser regulated at the factory. I have 3 of them in various watches, all of them run easily within the COSC spec of -4 to +6 seconds per day. For this one in particular when fully wound, on the timegrapher it settled down at +2 seconds per day dial up, then +6 spd crown left (12 o’clock down). Its lifetime average has been +1.3 spd over 120 non consecutive days (a week or two at a time) that I actively tracked when on winder or on wrist around the house.
The bracelet is a weak point. No on the fly adjust capability and no quick release spring bars. I never even wore the watch on the factory bracelet because of all that, I swapped it out immediately. I can’t wear a watch bracelet that doesn’t have the on the fly adjust capability anymore. Once you’ve had it on other watches, you can’t go back.
The glossy ceramic bezel looks good and will be very durable and scratch resistant compared to aluminum. The gloss goes well with the polished bits on the dial, knurling, bezel, and crown. It has 60 minute clicks (which I prefer, makes it much easier to use the bezel even for simple things like counting instead of timing) with a solid feeling, notchy action. It was extremely difficult to move the bezel when I first got the watch because it was very stiff, but also because it has shallow knurling, and it’s smooth and polished, so it lacks grip. It’s extra hard to turn when hands are slippery from water, and almost impossible when from soap or oil. The bezel action did eventually loosen up over time (in the beginning I used to just sit there and constantly rotate the bezel to loosen it up while watching tv), and now it’s much easier to turn. But the bezel and crown knurling could definitely be improved for better grip.
But the worst part, and the reason why I’m so dissatisfied with this watch - the lume pip is a little unprotected bead that seems to be just glued into the bezel. On the black version, very early on, after only a few times of wearing the watch - that lume pip broke off, and I didn’t notice until later because I hadn’t banged the watch against anything that would’ve made me check to make sure it wasn’t damaged. I never even noticed before whether lume pips were protected until my experience with that watch. Now I always make sure they’re shielded before I buy. I hate having a watch knowing a piece is missing, even if I’m the only one who knows.
I bought this white version right after the black one, but before the lume pip on the black one broke off - so I’ve never worn the white version outside the house because I want to keep it intact. I should just get over it and enjoy the watch for what it is, and let the lume pip break off on this one too. It is such a waste not to wear such a good looking watch.
It’s something I’ve always noticed about Hamilton watches - there always seems to be at least one part that’s made cheaply and not as durable as the rest of the watch.
There’s a very simple way to fix that problem - either make it with a fully protected lume pip, or get rid of the lume pip altogether and make the bezel bidirectional, since without the lume pip it wouldn’t meet diver requirements anymore anyway. That would change the watch from a diver to more of a pilot watch, but let’s face it - 99.99% of people aren’t diving with these, we buy divers for their water resistance/durability but don’t need a unidirectional bezel for diving purposes. Bidirectional is much more functional for timing things in everyday life. And the best type of bezel would be a bidirectional, 60 click, 12 hour bezel with full minute markings. Then you could not only use it for timing, but also to track a second time zone. That would be a total homerun.
In addition to that, add better knurling on the bezel and crown for better grip, quick release spring bars for the bracelet along with an on the fly adjusting clasp, at least a date (or better yet a day/date), then it would be a 5/5. Those should not be expensive additions either, they’re all very simple and relatively cheap modifications. All of that would take this watch to its highest potential in its price tier.
Since product quality is always relative to its price, if the lume pip issue were fixed, without any other changes, it would be a 4 - good, not yet great. But because this has such a cheaply made piece that breaks off so easily, it gets dropped to a 1. That’s inexcusable on anything in the $1k+ tier. A lot of watches at even the sub $500 tier have shielded lume pips so that they won’t break off.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 14, 2025
★★★★★ 5
Great quality shirt.
Size: XX-Large, Color: Butter
Nice quality and fits great, very comfortable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026