Pay in installments of $5.79 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 20 - Jul 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
baby jogger city turn vs nuna revv Baby Jogger City Turn Rotating Convertible Car Seat In DuneThe Baby Jogger city turn Convertible Car Seat features a secure rotating mechanism that allows you to turn the seat 180 degrees with one hand while in rear facing mode. The unique patented rotation brings your child 10 inches closer to you, and helps you maintain a more upright posture when lifting your child in and out and buckling them into the car seat. The seat smoothly rotates with one hand, then audibly clicks into place for assurance that it
The Baby Jogger® city turn™ Convertible Car Seat features a secure rotating mechanism that allows you to turn the seat 180 degrees with one hand while in rear-facing mode. The unique patented rotation brings your child 10 inches closer to you, and helps you maintain a more upright posture when lifting your child in and out and buckling them into the car seat. The seat smoothly rotates with one hand, then audibly clicks into place for assurance that it is safely secured. The car seat converts from rear-facing harness (4-50 lb) to forward-facing harness (26.5-65 lb) to grow with your child. Soft, lightweight fabrics featuring COOLMAX® moisture-wicking material will help keep your child cool and comfortable. Like your favorite workout wear, it's cooling and resistant to wrinkling and fading over time. The integrated RAPIDLOCK™ belt-tensioning technology and push-button LATCH make for a simple and secure installation in seconds. A 10-position headrest and 5-position recline ensure a comfy ride, and the no-rethread harness means you can adjust the harness without removing it. This seat has been tested with TRUE Test Plus™ safety standards, engineered to help protect your child in rollover, side, front, and rear collisions.
Features
- RAPIDLOCK™ base belt-tensioning technology and integrated push-button LATCH for simple, secure installation in seconds
- Rotation gives clear, direct access to the installation belt path, for our easiest install yet
- Colored belt paths and dual bubble level indicators help ensure a proper and level install in your car
- Engineered and tested with TRUE Test Plus™ safety standards (Tested to Reality Under Extremes) to help protect your child in rollover, side, front, and rear collisions
- Car seat audibly clicks when locked in rear-facing mode for assurance it's safely secured before driving
- Steel-reinforced frame provides strength and durability and EPP energy-absorbing foam allows for effective impact energy management
- Premium padding, removeable infant insert, and buckle covers for added comfort and support
- 10-position headrest and 5-position recline with a no-rethread harness makes adjusting your seat quick & simple
- Dishwasher-safe cup holder to make cleanup easy
- Innovative and secure one-hand 180-degree turn in rear-facing mode, making it easier for parents to get your child in and out
- Soft, lightweight fabrics featuring COOLMAX® moisture-wicking material to help keep your child cool and comfortable
- Brings your child 10 inches closer when rotated, so it's easier to buckle your child in and lift them in and out of the seat
- Patented rotation is specifically engineered to bring your child closer, helping to give you a more upright posture when placing your child in the car—a great benefit for your back
- Convertible car seat transitions from rear-facing harness (4-50 lb) to forward-facing harness (26.5-65 lb) to grow with your child
Specifications
- Usage Rear-facing harness: 4-50 lb
- Usage Forward-facing harness: 26.5-65 lb
-
Product Width:19 in
-
Product Height:32.5 in
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Love it it was perfect for what I needed it for. Good quality!
Size: 4 Panel, Color: Black
It like a very dark chocolate brown/black. What I liked most about it is that you just pull it out of the box take the long plastic film off of it and it's ready to go. It has protective feet on the bottom. It's very attractive and it was so easy. It's so nice when you have a product you don't have to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026