SKU: 39807163095
difference in snake plant and mother in laws tongue

difference in snake plant and mother in laws tongue Buy Mother in Laws Tongue Phoenix, AZ | Sansevieria

Sale price$19.51 Regular price$21.68
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

difference in snake plant and mother in laws tongue Buy Mother in Laws Tongue Phoenix, AZ | SansevieriaThe Toughest Indoor Outdoor Plant for Phoenix Homes Mother in Law's Tongue Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and

The Toughest Indoor-Outdoor Plant for Phoenix Homes — Mother in Law's Tongue

Mother in Law's Tongue (Sansevieria trifasciata) is the single most indestructible plant you can grow in the Phoenix Valley. This upright, sword-leafed succulent thrives in full sun patios, shaded entryways, bright indoor rooms, and dim office corners — it simply does not care. Native to tropical West Africa, Sansevieria has adapted to survive extreme drought, low light, and total neglect, making it the perfect choice for busy Scottsdale homeowners, Mesa rental properties, Gilbert office lobbies, and Chandler covered patios where other plants give up.

Mother in Law's Tongue Plant Details

Attribute Detail
Scientific Name Sansevieria trifasciata (syn. Dracaena trifasciata)
Common Names Mother in Law's Tongue, Snake Plant, Sansevieria, Saint George's Sword
Mature Height 2–4 feet
Mature Width 1–2 feet (clumping, spreads by rhizomes)
Growth Rate Slow to moderate — 2–4 new leaves per year
Sun Full sun to deep shade. Tolerates any light condition.
Water Very low. Extremely drought-tolerant. Overwatering is the #1 killer.
USDA Zones 9–12 (Phoenix is Zone 9b–10a — protect from hard frost below 32°F)
Soil Well-draining required. Adapts to Arizona caliche soils with added sand or gravel.
Foliage Evergreen — stiff, upright sword-shaped leaves with green-yellow variegation
Bonus NASA-proven air purifier — removes formaldehyde, benzene, and xylene

Mother in Law's Tongue Uses in Phoenix Landscapes

Covered Patios & Shaded Entryways

Mother in Law's Tongue is the top pick for Phoenix covered patios, north-facing entries, and shaded courtyards where most plants struggle. The upright, architectural form adds clean modern lines to outdoor living spaces in Scottsdale, Paradise Valley, and Chandler. Group 3–5 plants in matching pots for a designer-look patio border, or plant directly in a shaded landscape bed along a covered walkway.

Indoor Accent & Office Plant

Snake Plant is one of the few plants that actually thrives in air-conditioned indoor environments. Place it in a bright window, a dim hallway, or a fluorescent-lit office in Mesa or Tempe — it performs in all conditions. Its air-purifying qualities make it a smart choice for bedrooms, home offices, and commercial lobbies across the Phoenix Valley.

Modern Desert Container Plantings

The bold vertical leaves of Sansevieria look striking in sleek concrete, ceramic, or metal planters. Use a single large specimen as a patio focal point, or line up matching containers along a Gilbert pool fence or Peoria outdoor kitchen. Container planting also makes it easy to move indoors during rare hard freezes.

Low-Maintenance Ground Cover & Border

Planted en masse in a shaded landscape bed, Mother in Law's Tongue creates a dense, low-water ground cover that never needs mowing. Space 12–18 inches apart for a filled-in border within 2 seasons. Works beautifully under Desert Museum Palo Verde trees or along shaded property walls.

Best Time to Plant Mother in Law's Tongue in Phoenix

Spring (March–May) is the ideal planting window. Warm soil and long days fuel rapid root establishment. Fall (October–November) is the second-best option. Avoid planting outdoors in winter — Sansevieria is frost-sensitive and should be protected or brought inside when temperatures drop below 32°F.

How to Plant Mother in Law's Tongue

  1. Dig wide, not deep — 2x the root ball width, same depth. Sansevieria has shallow rhizome roots.
  2. Ensure drainage — break through any caliche layer. Add coarse sand or perlite if soil holds water.
  3. Backfill with native soil — a 50/50 mix of native soil and coarse sand is ideal for in-ground planting.
  4. Spacing — 12–18 inches apart for a border or mass planting; 2+ feet for standalone specimens.
  5. No water basin — Sansevieria prefers to dry out quickly. Skip the soil ring.
  6. Gravel mulch — 2 inches of decomposed granite. Avoid organic mulch that traps moisture against the base.

Watering Mother in Law's Tongue in Phoenix

First Year Watering Schedule

  • Weeks 1–2: Water once, deep soak, then let soil dry completely before watering again (5–7 days).
  • Months 1–3: Every 10–14 days in warm months.
  • Months 4–12: Every 2–3 weeks. Let the top 2 inches of soil dry between waterings.
  • After Year 1: Every 3–4 weeks in summer; monthly or less in winter. Outdoor plants in shade may need no supplemental water in winter.

Drip Irrigation

Place 1 emitter (0.5–1 GPH) 6 inches from the base. Sansevieria is far more likely to die from overwatering than underwatering. If leaves turn mushy or yellow at the base, you're watering too much. When in doubt, skip a cycle. Indoor plants in pots should be watered only when soil is completely dry — typically every 2–4 weeks.

Can Mother in Law's Tongue survive outdoors in Phoenix year-round?
Yes, in most of the Valley. It thrives outdoors in covered, frost-protected areas. During rare hard freezes (below 32°F), either cover the plant with frost cloth or move containers indoors. In most Phoenix winters, it handles outdoor conditions just fine.

Is Snake Plant toxic to pets?
Yes, Sansevieria is mildly toxic to dogs and cats if ingested. It typically causes nausea and vomiting. If you have curious pets, place the plant on an elevated surface or choose a pet-friendly alternative.

How do I propagate Mother in Law's Tongue?
The easiest method is division — separate the rhizome clumps when repotting. You can also propagate from leaf cuttings placed in well-draining soil, though this takes 2–3 months to root. Division gives you an instant new plant.

Why is my Snake Plant not growing?
In Phoenix, the most common reasons are overwatering (causes root rot) and too much direct summer afternoon sun (causes leaf burn). Move to bright indirect light or morning sun, reduce watering, and growth should resume in spring.

You May Also Like

  • Elephant's Ear — bold tropical foliage for shaded Phoenix patios and entryways.
  • Flapjacks — another tough succulent with dramatic paddle-shaped leaves that pairs well with Snake Plant.
  • Blue Elf Aloe — a compact, colorful aloe that thrives in the same containers and landscape beds.
  • Ponytail Palm — an architectural indoor-outdoor plant with similar indestructible qualities.
  • Firestick Euphorbia — adds vivid color contrast next to Snake Plant's green-yellow foliage.

How Many Mother in Law's Tongue Do I Need?

Snake Plant clumps stay narrow, just 1 to 2 feet wide, and spread slowly by rhizome, so it is planted in groups for a border, a mass bed, or matching containers. Space plants 12 to 18 inches apart and they knit into a filled border within about two seasons. Use this table to size a shaded bed or border run.

Border / bed length Spacing 12 in Spacing 18 in
10 ft 10 plants 7 plants
20 ft 20 plants 14 plants
Container cluster 3 to 5 plants per large pot for instant fullness

Mother in Law's Tongue Season-by-Season in Phoenix

  • Spring (Feb to Apr): Best planting window. Warm soil and long days push 2 to 4 new upright leaves and any rhizome spread for the year.
  • Summer (May to Sep): Thrives in heat under cover or bright shade. Direct west afternoon sun can scorch the leaves, so give it morning sun or filtered light. Monsoon humidity is fine as long as the soil drains and the base dries out between waterings.
  • Fall (Oct to Nov): Good secondary planting season. Growth slows as nights cool.
  • Winter (Dec to Jan): This is the one weak spot. Sansevieria is frost-sensitive and leaves turn mushy below about 32F. Cover with frost cloth on freeze nights or grow it in pots you can pull under cover or indoors.

At a Glance

✔ Drought-Tolerant   ✔ Evergreen   ✔ Low-Maintenance   ✔ Pool-Friendly (Low-Litter)   ✔ Fire-Wise   ✔ Deer & Rabbit-Resistant   ✔ Spineless

Plant It With

  • African Spear: a cylindrical Sansevieria cousin that layers texture in the same shaded bed.
  • Elephant's Ear: bold broad foliage for a tropical, shaded-patio pairing.
  • Flapjacks: paddle-shaped succulent that contrasts the upright sword leaves.
  • Ponytail Palm: another tough, sculptural indoor-outdoor plant with the same care needs.

Is Mother in Law's Tongue Right for Your Yard?

Snake Plant is ideal for covered patios, north entries, shaded courtyards, and indoor rooms anywhere in the Valley, in fast-draining soil or a pot where the roots dry out between waterings. It is not a fit for an exposed west-facing bed in full afternoon sun, a low spot that stays wet, or a frost-exposed location you cannot cover in winter. It is also mildly toxic to pets if chewed, so keep it out of reach of curious dogs and cats.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 39807163095

Discover Niche Categories That Outsell difference in snake plant and mother in laws tongue

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1041 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Castle
Draper, US
★★★★★ 5
Makes a great pad for an ergonomic keyboard and mouse
Color: Taupe, Size: 12-Inch x 20 Feet
After learning about the dangers of a sedentary lifestyle, I switched to a standing desk. I found an old, four-drawer desk once used for the production of a weekly newspaper. It is now a converted stand-up writing desk with a shiny, smooth lacquered finish. I love the desk and I'm adjusting to the switch of working from a standing position. One problem arose. My laptop keyboard and mouse wouldn't stay in place. As I typed, the keyboard would rattle and slide down the desk. A co-worker suggested I try . It works better than I expected. My Logitech Optical TrackMan Mouse and now stay in place. My keyboard is 11 inches wide, so the 12-inch wide material is a perfect fit. The liner is sticky, so much so that I have to hold the material down to lift the mouse from it. The liner left no residue on my desk. I used 30 inches of the material for a base beneath my ergonomic keyboard and mouse. I plan to change the liner as often as needed, since it will collect more dirt and dust than if it were stored in a drawer. That means I can replace my modified keyboard/mouse pad seven more times. Getting eight pads for $8.99 is a good value. Rating: Five stars. UPDATE: I received a question from another Amazon customer regarding my mouse. The features a large, finger-controlled trackball. A regular mouse would not work on the shelf liner but it is fantastic for trackballs.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2014
E
Verified Purchase
Edward Smith
Alexandria, US
★★★★★ 3
Liner seems good, but releases strong fumes
Color: Taupe, Size: 12-Inch x 20 Feet
The liner is quite functional, it looks fine and is manufactured in a straight/square style (the other thicker foam style liner is not straight and is hard to cut square). The downside, with the 2 rolls that I got, is that the liner has a nasty off-gassing of fumes, so I suggest cutting it to size, and then putting it through a wash cycle (dishwasher or clothes washer) and then putting it in place after drying. If you don't do this, then those of you who are sensitive to these kinds of fumes, might have to unload the items and wash the liner at a later time. Many are oblivious and won't notice the fumes (at first or ever) and they just go on, never making the connection as to why their kitchen stinks, or they have headaches (or imagined allergies, etc.). It took me days to figure it out. If you have a new roll of the liner, just smell it, and realize that if you don't wash this material, those fumes will be leaching out into your cupboard for a while (perhaps longer). For those that can't smell it, then I guess you'll be quite happy about that. While the liner looks fine, and easily cuts square, I can't give this a higher rating as the washing effort adds so much effort to the process. More and more items produce these kinds of fumes and I think reviewers should mention this as part of their overall rating.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 13, 2014
S
Verified Purchase
Steven Francis
Grantham, US
★★★★★ 5
A PLACE FOR YOUR HEADSET
Size: Small Storage Area, Size: Small Storage Area
This holder is fantastic, if you have the steel series headset and extra batteries it's perfect you'll love it, but would like to see a white version as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 23, 2026
A
Verified Purchase
Amazon Customer
Cuba, US
★★★★★ 2
Not quite right
Size: Small Storage Area
this is "as advertised" but a simple extra ridge of plastic would have made it perfect. the issue people are having with the arctis pro, the thing that makes you want a stand for it, is the base station is a little too light, you can push it when you go to use the knob's integrated button. Issue here is the fit of the base is loose enough, you can still push the base out of the back. So it looks nice, and gives you a place to put the headphones and some other desk clutter, but it doesn't REALLY solve the problem.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 13, 2026
N
Verified Purchase
Nick
San Leandro, US
★★★★★ 3
3D Printed (Not Mentioned) and Base is Way Too Loose
Size: Small Storage Area, Size: Small Storage Area
I bought this to clean up my desk setup for my SteelSeries Nova Pro Wireless, and while it looks decent from a distance, there are two major issues that weren't clear from the product page. First, this is a 3D-printed product. Nowhere in the Amazon description or photos does it state that this is 3D printed. You can clearly see the layer lines and "stair-stepping" on the curves. While I don't mind 3D printing in general, for this price point, I expected a standard injection-molded plastic finish. The product page feels a bit misleading by omitting this detail. Second, the fit is very poor. The "integrated dock" for the GameDAC station doesn't actually lock into place. There is no snap or friction fit; it sits so loosely that you can slide the DAC out of the front or back with the single push of a finger. This makes it feel unstable, especially when you are trying to use the volume dial or swap out batteries. Bottom Line: It’s a nice idea and fits the aesthetic of the headset, but the execution feels like a prototype rather than a finished consumer product. If you're looking for a secure "lock-in" feel for your expensive base station, this isn't it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 12, 2026

recommand products