SKU: 37924471856
triplet herbicide ingredients

triplet herbicide ingredients Strike 3 Herbicide 3-Way Broadleaf Weed Control 2.5 Gallons

Sale price$25.81 Regular price$28.68
Save 10%

Pay in installments of $7.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 22 - Jul 27

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

triplet herbicide ingredients Strike 3 Herbicide 3-Way Broadleaf Weed Control 2.5 GallonsRUP (license required) in CA, LA, MA, NJ, NM, and TX No sale in AK, HI, ME and OR Some weeds are harder to kill than others. With Strike 3 herbicide, tough weeds don't stand a chance. It contains three active ingredients to kill the most hard to control weeds on a variety of turfgrass sites and noncrop areas. It can even be mixed with certain fertilizers to promote healthy lawns while killing the weeds. When annual and perennial weeds invade the lawn,

RUP (license required) in CA, LA, MA, NJ, NM, and TX

No sale in AK, HI, ME and OR

Some weeds are harder to kill than others. With Strike 3® herbicide, tough weeds don't stand a chance. It contains three active ingredients to kill the most hard-to-control weeds on a variety of turfgrass sites and noncrop areas. It can even be mixed with certain fertilizers to promote healthy lawns while killing the weeds. When annual and perennial weeds invade the lawn, Strike back with Strike 3 weed killer.

How Strike 3 Herbicide Works

Strike 3 weed killer contains three active ingredients for systemic control of hard-to-kill weeds: dicamba, mecoprop-p and 2,4-D. They each have a specific mode of action to get right to the source and knock down the weeds from the target sites. It works on the most invasive weeds in the area, from spurge to dandelion. Strike 3 may be mixed with some liquid fertilizers to improve turf growth at the application site.

Where to Use Strike 3 Herbicide

Use Strike 3 herbicide to kill weeds on turfgrass and noncrop sites, as well as to control weed growth on sod farms. It kills invasive weeds and keeps them off home lawns and commercial turf, as well as along roadsides, rights-of-way and other labeled noncrop areas. Apply it with spray equipment to control weeds on nursery farms and golf courses, ornamental plantscapes and recreational areas. It removes annual and perennial weeds from ditches and keeps grassy landscapes free of clover, henbit and more.

Target Weeds

Get rid of weeds with the active ingredients in Strike 3 herbicide. It's an effective weed killer that targets everything from bedstraw to yarrow. It kills and controls black medic and buckhorn, chicory and chickweed, and dandelion and ground ivy. Use it to knock down henbit, knotweed and mallow, as well as pigweed, plantain and poison ivy. It works to kill the most invasive weeds on roadsides and home lawns, such as ragweed, speedwell and wild garlic. See the label for even more target weeds.

Benefits of Strike 3 Weed Killer

Strike 3 weed killer controls the weeds from the shoots to the roots, burning down the weed from the inside out. It's selective in nature, so it's more effective on target weeds and less harmful to surrounding turfgrass and ornamentals. It can be mixed with fertilizers and adjuvants to kill weeds and to promote healthier, stronger grass. Some benefits and features include:

  • Contains three active ingredients for better weed control
  • Safe for use on sod farms and home lawns
  • Can be combined with labeled fertilizers
  • Knocks out annual and perennial broadleaf weeds
  • Keeps golf courses free of invasive weed growth

Control Weeds on Turf with Strike 3

Whether it's clover and dandelion or henbit and spurge, Strike 3 herbicide kills the weeds on a variety of sites. It eliminates the weeds along roadsides, on sod farms and in residential turfgrass. It's effective against the most invasive annual and perennial weeds and contains three active ingredients to provide more successful weed control. When weeds take over home lawns and ornamental plantscapes, use Strike 3 weed killer to get rid of the weeds for good.

Specs
Manufacturer Heritage PPG
Active Ingredient Dimethylamine salt 2, 4 dichlorophenoxyacetic acid, Dimethylamine salt of (2)-R-2 (2-methyl-4-chlorophenoxy) propionic acid, Dimethylamine salt of dicamba (3,6,dichloro-o-anisic acid), Other Ingredients
Composition 30.56%, 8.17%, 2.77%, 58.50%
Container Size Gallon
Case Amount 4x1
Application Amount See label for details.

Labels and SDS Forms

 

Label

VIEW

SDS

VIEW

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 37924471856

Discover Niche Categories That Outsell triplet herbicide ingredients

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 15 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
B. Colonna
Chelsea, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
Natrona Heights, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
Lexington, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
JW
West Palm Beach, US
★★★★★ 5
Great edger
This was a gift for someone very picky about their yard. They loved it and said it works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
P
Verified Purchase
PrimeUser7887
Cuba, US
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it. However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep. The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market. Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products