Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
dracaena fragrans hawaiian sunshine Hawaiian Sunshine DracaenaDracaena fragrans 'Hawaiian Sunshine' Dracaena fragrans 'Hawaiian Sunshine' is a striped corn plant cultivar with glossy dark green leaves marked by lighter green central striping. The leaves are long, sword shaped, and carried on upright canes, giving the plant a tall, tidy outline in a narrow footprint. The lime green centre runs down the length of each leaf, while the darker outer bands frame the blade. In a larger pot with several canes, the
Dracaena fragrans 'Hawaiian Sunshine'
Dracaena fragrans 'Hawaiian Sunshine' is a striped corn plant cultivar with glossy dark green leaves marked by lighter green central striping. The leaves are long, sword-shaped, and carried on upright canes, giving the plant a tall, tidy outline in a narrow footprint.
The lime-green centre runs down the length of each leaf, while the darker outer bands frame the blade. In a larger pot with several canes, the different stem heights create a layered indoor tree shape.
Fresh green striping and upright stems
- Foliage pattern: Glossy green leaves with lighter green striping through the centre.
- Growth form: Upright cane growth with leaves clustered at the growing points.
- Room fit: Adds height in a narrow shape, especially as the canes mature.
- Care needs: Warmth, drainage and measured watering keep the cane and root zone firm.
Layered canes and glossy leaf heads
'Hawaiian Sunshine' follows the Dracaena fragrans pattern of woody stems topped by rosettes of leaves. As the plant matures, the cane becomes more visible below the foliage, especially when older lower leaves are removed. This is part of normal cane development and gradually gives the plant a taller indoor tree shape.
Warm conditions, free drainage and measured moisture keep the cane and root zone firmer. The leaves are firm and waxy enough for average indoor air, but the tips can still react to salt build-up, hard water or extended dryness.
Care for striped Dracaena canes
- Position: Bright filtered light keeps the central striping clean. Keep the leaves out of direct midday sun through glass.
- Moisture check: Let the upper 40–50% of the pot dry before watering. Larger cane plants can stay moist deep in the pot, so check below the surface.
- Root aeration: Choose a well-aerated potting mix that drains evenly. Add mineral components if the mix stays wet for several days.
- Warmth: Keep the plant in stable warmth, preferably above 18 °C. Cold floors and drafty entrances can stress the roots in winter.
- Dry indoor air: Average household humidity is normally fine. Tip burn is more often a watering or water-quality issue than a demand for constant high humidity.
- Feeding: Use a diluted balanced fertiliser during active growth. Skip feeding when the plant is not pushing new leaves.
- Balance: Turn the pot occasionally so the canes stay even and the leaf clusters do not lean strongly toward one side.
- Height control: Remove old leaves when they yellow. Tall canes can be cut back during active growth if a shorter branching point is wanted.
Reading stress signs on 'Hawaiian Sunshine'
- Crisp tips: Check tap water quality, fertiliser build-up, dry periods, and low humidity near radiators. Flush the pot if salts have accumulated.
- Pale dry marks: These often come from direct sun. Move the plant farther from the window or filter the light.
- Flat striping: Very low light can make the whole plant look duller. Increase filtered light gradually.
- Drooping leaves with wet soil: Inspect the roots and cane base. Wet wilt can look like underwatering, but the solution is better drainage and a drier root zone.
- Mealybugs in leaf bases: Look into the striped leaf clusters, especially where leaves overlap tightly.
Leaf safety for floor placement
Pets can become unwell after chewing Dracaena fragrans foliage, so place 'Hawaiian Sunshine' where cats and dogs cannot pull down or nibble the leaves. This matters especially with taller floor plants.
Fragrant species name, bright cultivar name
Dracaena refers to the dragon-tree lineage, with the name rooted in the idea of a female dragon. The epithet fragrans points to the fragrant flowers of mature Dracaena fragrans, although indoor plants are grown mainly for foliage and do not flower reliably. 'Hawaiian Sunshine' has bright green striping that runs through the foliage.
Dracaena fragrans 'Hawaiian Sunshine' has glossy dark green leaves, lime-green central striping and upright canes that form a tiered indoor tree shape.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 522 reviews
Sort
Product Reviews
★★★★★ 5
Review
Style: 7.2 Receiver
So far I’ve been very pleased with the unit although I only use it for powering two large front 4 ohm external speakers while listening to music streaming on apps in the TV. Unlike AVs from both Denon (who I believe has the best tech support) and Onkyo that I returned, when I turn on my Sony Bravia TV with settings enabled for eARC, the Yamaha unit does not automatically turn on and subsequently switch sound to the external speakers. Perhaps it’s possible but it’s not something that I wanted. Additionally, I came to learn that both Denon and Onkyo are owned by the same parent company, which may explain their common behavior. However, the Yamaha receiver does automatically switch to the external speakers when I power it on and I am able to control the AVR volume with my TV remote control. Additionally, with the settings I have on the TV and AVR, when I turn off the AVR, the sound automatically switches back to coming from the TV speakers, and the TV does remain on. Again, something I want to happen. In general, I’ve found that these devices are very complicated with their myriad number of settings on both the TV and the AVR, and it can be very challenging to properly set them. I’m retired now but my undergraduate degree is in electrical engineering from an Ivy League school at a time when we used slide rules to do the mathematics. I would say that it’s not easy to learn how to use the devices with eARC. If you only want to improve the TV sound, I'm guessing that's it's a lot simpler to use a sound bar. In my case, I've had large and expensive 4 ohm front speakers that I wanted to continue to use (my old AVR does not have any HDMI connections) so a sound bar was not an option for me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 14, 2024
★★★★★ 1
Sound is fine thus far, but the rest is an exercise in irritation
Style: 7.2 Receiver
I selected this receiver based on spec sheet comparison to other receivers in its general class and price point, as well as reading through ‘professional’ reviews and assessments of various levels of dubiousness. The general specs as far as features and performance were the biggest factor. But there are things that can’t be discovered in ad copy and that are frequently omitted from even the most genuine and considered review.
tl;dr: This is a device with an incredible range of functionality that is hidden from the end user by poor documentation practices, and irritating design choices that bury critical menus under unstated tech dependencies. You must have an Android/iPhone capable of running their apps, and a display connected via a video out to get good output from anything but the headphone jack.
Thus far the sound output has proven quite satisfactory. It is these other factors that are dragging the rating into the proverbial pit.
The display is a bit cheap, and the backlighting across the panel tends to wash things out about half as much as it illuminates. It’s very old tech—but forgivable if the result is better components elsewhere. Still, the display on my mini battery powered air inflator is a crisp full color OLED, so I have my doubts that that is the case here.
The biggest problem is the lack of a physical manual. There’s something of a quickstart guide, but when you consider that most of the controls are via the remote and hidden in menu systems and that those menus have a certain opacity to them, it’s not enough information by long shot, especially if you’re not an experiential learner who strongly prefers to dive into the action and see what happens. If you prefer a more studious approach where you don’t even touch a button until you have some idea what it might do, this is going to be more challenging.
There are digital manuals. You can get access to the manual via the Yamaha website, or by downloading via an app that exists to serve up Yamaha manuals. This dependence on screens for vital information is grotesque and should be considered unacceptable. There are multiple problems with this approach.
One is the assumption the end user is going to have a suitable phone and be comfortable downloading an app and having a manual on a poor screen for reading technical information and diagrams on. I’m also averse to the idea of my manual requiring adequate battery power, and the only touch navigation I find acceptable in a manual is turning a page; for clarity, I mean physically moving a paper page, not tapping or swiping. Call me old fashioned, call me old, but I’ve had failures in these things before. I’ve never had a book fail to work without it being destroyed.
Another issue is longevity. I’ve had too many devices outlive the availability of their digital documentation to be on board with that being the only way it is available.
An app is also a requirement to get access to bluetooth as an input. Or at least, that is the only way I was able to get it to work, and then only because I decided to see if the “Musiccast” thing was going to get me access to bluetooth. If there is another way, it wasn’t documented, not that the way I found was particularly well documented. There was nothing saying that that was how to get access to bluetooth as an input, only a short sentence saying you had to set the input to bluetooth for it to receive audio over bluetooth—but cycling through inputs via the remote or the dial on the front never reached a bluetooth input until I had set up Musiccast.
Musiccast requires a phone with a working wifi radio to connect to it.
Once again, this dependence on an app on a phone, and presumption the end user will both have one and be willing to link it up this way is an obscenity. But it’s made worse by having basic labeled functionality hidden behind it, and poorly documented at that.
There are at least two separate menu systems, and two means of accessing them. It is possible to access them from the front panel, using a dial, but the interface is incredibly cramped on a tiny display with bad contrast and worse use of space. The other method is using the remote to trigger an overlay on video out, assuming you are using the HDMI out of the receiver to connect to a display. Ultimately, this is required to have full access to to all the settings. The menu on the unit itself is absolutely tiny in what it can do compared to the full functionality of the unit.
For example, it is required you access the on screen menu to select which speakers are in use, what kind they are, and whether or not you are wired for Bi-Amp. If you don't set these settings and your setup doesn't match the default setup, you're going to have issues. The app doesn't cover all of this, and for a device that places such heavy emphasis on it's ability to play music, it is very annoying to have to have a display hooked up to have access to critical setup functions--granted, they really want you to buy into their Musiccast eco-system, so much so that the app is only suitable for setting up Musiccast branded speakers.
I don't object to having to set things up. While it would be nice if the unit could sense whether or not an output was connected, I realize that with some of those outputs, knowing it is connected isn't sufficient as they might be put to several uses--still, that could be handled with a switch or a system menu on the device itself.
There are a few buttons on the front of the receiver, but all but the power button are capacitive buttons, marked in faint white print with poor contrast. I only discovered them when peering at what I had thought was a blank face looking for the “Connect” button called out in the manual to get Musiccast working. These are terrible buttons, and it’s clear the engineers knew it when they made the power button physical.
Internet Radio was apparently also locked behind the Musiccast app connection as it didn’t show up as an input until I connected the Musiccast app—again, not documented beyond saying you had to set the input to Internet Radio to use it.
Another irritating grievance hidden in menus only accessibly by poking around the on-screen menu, only accessible if you have a display hooked up: Eco mode. In its default state, this will partially shut down after 20 minutes of not processing sound. If hooked up to a display, this will then go to a pass-thru mode, and it will not automatically pick back up again once audio signal is again being sent.
For example, you have a console or PC hooked up to HDMI in, and the display hooked up to HDMI out/eArc. If you are using those devices in a video only mode, with no audio signal, whether it's because you paused a game, or simply got lost reading something and the music stopped, after 20 minutes, the audio processing will shut down, there will be a bit of a flicker and a snap as internal routings are switched around, and the unit will no longer output sound. All sound will iinstead be sent to the display as if the receiver didn't exist. This will persist even if you do start sending audio again. It will not turn itself back on even if you swap inputs, though other inputs will work as normal. The only way I've found to get it out of pass-through for that input is power cycling either the receiver or the sending unit.
Fortunately this can be changed, unfortunately, you absolutely have to have a display hooked up to access the menus to do so.
Overall, the user experience has been underwhelming at best with poor documentation where it exists, an absence of physical documentation, and some terrible choices in terms app dependency. I absolutely hate that I have to use my phone to get access to not just full function but a basic function like being able to pair a bluetooth source to the receiver for playback.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2025
★★★★★ 5
The best amplifier Ive had since my 1985 Yamaha R-7.
Style: 7.2 Receiver
The Yamaha rx-v6a, tsr-700, and yes, the rx-a2a, are all pretty much the same AVR, on the same firmware channel. Same power, same dacs, same dac implementation, same output stages, same construction, they’re the same. The a2a has a 5th foot, and 2 ten thousand micro farad capacitors in the power supply, while the v6a and tsr-700 have 2 eighty-one hundred micro farad capacitors in the power supply, and only 4 feet. These 2 tiny differences make no difference in sound quality or reliability, whatsoever. All three are simply awesome. From the DACS to the amps, and everything in between, these Yamahas sound better and out perform all the others. The HDMI boards have all been updated, and the firmware is mature. To even match these in sound quality and reliability and longevity, you would have to spend many thousands of dollars. Of the rx-v6a, the tsr-700, and the rx-a2a, which ever one is on sale for the least, get that one, because they’re the same device. In this case, that’s a good thing because you’ll love them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 16, 2025
★★★★★ 5
Yamaha quality, solid audio
Style: 7.2 Receiver
Best in class YAMAHA .... better than DENON or ONKYO in my opinion. DENON and ONKYO both have issues with overheating and then shutting down. Yamaha cruises along on same power level without any hiccups.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026
★★★★★ 5
SOUND - is Amazing, Incredible and better than the movie theater!
Style: AVR-X1800H
Arrived quickly. Setup was easy for for quick start, but to fine tune will take a good deal of effort (fun for me so no issues). OK, SOUND - is amazing, incredible and better than the movie theater! (paired with Klipsch 5.1, but will turn it into a 7.2). Drowns out my neighbors dogs which bark all the time - this system can get loud but the clarity is crisp and clean. Recall 20 years ago this system would have cost $10k plus for everything, now set me back around $1500 for all.
But this review is on the receiver and it is superb! Looks brand new, has sufficient warranty and 90-day return option so more than enough time to try and determine for yourself. The price is about $2-300 lower than a new one and every bit as effective so I definitely recommend this product to anyone that wants a very high quality home theater at a super low price point. Entry level to experienced, this receiver should satisfy all.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2025