Pay in installments of $6.06 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 20 - Jul 25
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
philodendron jungle boogie Philodendron Jungle Boogie - How to Care for Philodendron Jungle BoogieDescription Light Soil Water Hardiness Philodendron Jungle Boogie is a captivating Thai hybrid plant that boasts long, narrow leaves adorned with a striking featuredeep serrations along the edges of the leaves. These serrations give the plant an exotic and unique appearance. The leaves of the 'Jungle Boogie' can grow to impressive lengths, ranging from 2 to 3 feet. The distinct leaf shape and serrations set it apart from other philodendron varieties.
-
Philodendron Jungle Boogie is a captivating Thai hybrid plant that boasts long, narrow leaves adorned with a striking feature—deep serrations along the edges of the leaves. These serrations give the plant an exotic and unique appearance. The leaves of the 'Jungle Boogie' can grow to impressive lengths, ranging from 2 to 3 feet. The distinct leaf shape and serrations set it apart from other philodendron varieties.
This plant's impressive size makes it an ideal choice for a statement plant and a captivating centerpiece in modern interior decor.
The remarkable foliage of this plant goes beyond aesthetics; it plays a vital role in enhancing air quality and creating a healthier living environment. The large, lush leaves are very effective in purifying indoor air and absorbing harmful chemicals.
Philodendron Jungle Boogie is relatively easy to care for, making it a suitable choice for plant enthusiasts at all experience levels. Its robust nature and adaptable characteristics mean that it can thrive with minimal maintenance, in most indoor settings.
-
Provide bright, indirect light for your Jungle Boogie. While it can tolerate some shade, it will exhibit its most vibrant colors and growth in well-lit conditions. Avoid direct sunlight, as it can scorch the leaves.
Allow the top inch of the soil to dry out between waterings. Water thoroughly, ensuring that excess water can drain from the pot. Overwatering can lead to root rot, so it's essential to strike a balance in maintaining soil moisture.
Jungle Boogie thrives in well-draining soil that retains some moisture. A suitable potting mix for this plant is a combination of peat moss, perlite, and a small amount of compost or well-rotted manure. Using a standard houseplant potting mix with good drainage properties should work well for this philodendron.
Keep this plant in a warm and consistent environment. It thrives in typical indoor temperatures between 65°F to 80°F. This philodendron appreciates higher humidity levels (above 50%), which mimic its natural tropical habitat.
Feed your plant with a balanced, water-soluble fertilizer during the growing season (spring and summer) every 4-6 weeks. Reduce or halt fertilization during the dormant winter period.
Philodendron Jungle Boogie, like many other plants in the Araceae family, contains insoluble calcium oxalate crystals and might be mildly toxic.
-
USDA Zone 9-11
USDA Zone 9b: to -3.8 °C (25 °F)
USDA Zone 10a: to -1.1 °C (30 °F)
USDA Zone 10b: to 1.7 °C (35 °F)
USDA Zone 11: above 4.5 °C (40 °F)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 5 reviews
Sort
Product Reviews
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast.
I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers.
(I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.)
I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers.
These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug.
I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin.
My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs.
I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals.
These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together.
The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug.
I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
★★★★★ 5
Well made, a solid connection.
Size: 6 Pairs / 12 pcs
I liked them. They really lock down on the speaker wire to make a firm connection. They seem well made and are easy to install. My system sounds great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2026
★★★★★ 5
Works as intended
Size: 12 Pairs / 24 pcs
These banana plugs are quite easy to use, and securely connected my speaker cables to the receiver. They have a quality feel as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 27, 2025