Pay in installments of $5.60 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
bob gear handlebar console BOB Gear Deluxe Handlebar Console with Tire Pump SingleEverything you need is now within your reach: keep stroller tires inflated, beverages insulated and items organized. A convenient on the go tire pump is included, compatible with all BOB pneumatic stroller tires. Beverages stay cold or warm with insulated bottle holders, and phones, snacks & other essentials stay organized in the substantial center pocket. Compatible with all BOB single strollers. Flexible pump hose ensures a secure valve fit even in
Everything you need is now within your reach: keep stroller tires inflated, beverages insulated and items organized. A convenient on-the-go tire pump is included, compatible with all BOB pneumatic stroller tires. Beverages stay cold or warm with insulated bottle holders, and phones, snacks & other essentials stay organized in the substantial center pocket. Compatible with all BOB single strollers.Flexible pump hose ensures a secure valve fit even in tight or hard-to-reach places. Please refer to User Guide (Page 2) on the proper way to attach & pump the tires on your stroller prior to first use.
HANDLEBAR CONSOLE:
- Four hook & loop attachment straps ensure an easy & secure fit.
- Two insulated beverage holders mean you’ll never go thirsty, and structured bottom surface allows for easy removal of beverages.
- Large center compartment for essential items, like extra Inner Tubes and Patch Kits for on the fly fixes, provides ample space and a secure closure for safekeeping.
- Three front exterior storage pockets enables storage of smaller items.
- Additional secured storage pocket on back houses the Tire Pump for easy access.
- Compatible with all BOB Single Strollers and the BOB Motion Stroller.
- Material made from water and stain resistant polyester.
TIRE PUMP:
- Expandable & lightweight pump retracts to a compact size to save space when not in use.
- Flexible pump hose ensures a secure valve fit even in tight or hard-to-reach places.
- Ergonomic grip & single-stroke pumping action provide comfort and efficiency.
- Maximum Pressure (PSI): 90 (follow the specific tire pressure guidelines in your stroller’s User Guide).
Compatibility based on Serial Number (Serial Number range listed)
- BOB Sport Utility Stroller 2005-2010: AA000001-AA028794
- BOB Sport Utility Stroller D'Lux 2005-2010: AB000001-AB007940
- BOB Sport Utility Stroller 2011-2015: AU000001 and higher
- BOB Sport Utility Stroller 2016+: U65185000001 and higher
- BOB Ironman Stroller 2005-2010: AC000001-AC030817
- BOB Ironman Stroller 2011-2015: AV000001 and higher
- BOB Ironman Stroller 2016+: U57185000001 and higher
- BOB Revolution Stroller 2005-2010: AF000001-AF245120
- BOB Revolution 12" AW Stroller 2005-2010: AK000001-AK030307
- BOB Revolution SE Stroller 2011-2015: BB000001 and higher, DA000000 and higher
- BOB Revolution CE Stroller 2011-2015 : AP000001 and higher
- BOB Revolution Flex Stroller 2014-2015: EC000001 and higher, EE000001 and higher
- BOB Revolution Flex Stroller 2016+: U61185000001 and higher
- BOB Revolution Pro Stroller 2014-2015: EA000001 and higher
- BOB Revolution Pro Stroller 2016+: U631850000001 and higher
- BOB Stroller Strides Fitness Stroller 2005-2010: AG000001-AG012415
- BOB Stroller Strides Fitness Stroller 2011-2015: AQ000001 and higher
- BOB Stroller Strides Fitness Stroller 2016+: U68185000001 and higher
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 20 reviews
Sort
Product Reviews
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly.
while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026