Variant SKU: PSP0256
Pay in installments of $7.15 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 21 - Jul 26
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
where to buy navigate herbicide Navigate HerbicideOverview Variant SKU: PSP0256 Navigate Herbicide Aquatic Weed Killer for Ponds & Lakes Navigate Granular Aquatic Herbicide is a powerful 2,4 D based selective herbicide designed to control submerged and floating broadleaf weeds in ponds and lakes. Formulated on heat treated attaclay granules, Navigate sinks quickly to the bottom, releasing the active ingredient directly into the root zone for maximum effectiveness. It is especially effective against
Overview ▾
Pond Weeds Controlled ▾
- Watermilfoil (including Eurasian Watermilfoil)
- Water Stargrass
- Bladderwort
- White & Yellow Water Lily (Spatterdock)
- Water Shield
- Water Chestnut
- Coontail*
*Repeat treatments may be necessary for resistant species.
How to Apply ▾
- Apply evenly using a broadcast spreader.
- Typical rate: 5–7.5 lbs per 2,000 sq ft.
- Rates vary from 100–200 lbs per acre depending on target weed.
- 50 lb bag treats up to approximately 20,000 sq ft.
Initial results appear within 7–10 days. Full control typically occurs within 3–5 weeks as weeds die and decompose.
For heavy infestations, apply in lanes with untreated buffer strips (50–100 ft wide) to prevent oxygen depletion. Treat buffer areas after initial treated zones have decomposed.
When to Apply ▾
Best results occur when applied in spring and early summer while weeds are actively growing.
Late season applications are possible but may require repeat treatments and results may not be fully visible until the following season.
Water pH below 8 generally yields best performance.
Active Ingredient ▾
27.6% 2,4-D (Butoxyethyl Ester of 2,4-Dichlorophenoxyacetic Acid)
Specially formulated granular carrier resists rapid breakdown and delivers chemical directly to the plant root zone.
Restrictions & Important Information ▾
Shipping Restrictions: Cannot ship to CA, CT, ME, MI, NJ, NY, OR, WA or Canada.
- Not for use in water used for irrigation, agricultural sprays, dairy watering, or domestic water supplies.
- 1-day swimming restriction.
- 7-day irrigation restriction.
- 7-day drinking water restriction.
- Limited to 2 applications per season (minimum 21 days apart).
In some states, permits may be required for chemical use in public waters. Always consult the product label and local regulations.
*Product does not qualify for free shipping*
Oxygen & Water Quality Considerations ▾
As treated weeds decompose, they consume oxygen. When weed density is heavy, treat in sections to maintain proper dissolved oxygen levels for fish safety.
For enhanced breakdown of dead vegetation, beneficial bacteria such as Muck Remover may be applied after treatment.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 7 reviews
Sort
Product Reviews
★★★★★ 5
Quality
Quality item. Using a butcher block on top to make a desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
★★★★★ 5
I love it!!!
Size: M Desk Unfinished 3/4-in and 1/2-in
Easy to assemble, all the pieces were in the box. I set everything out to be sure. Instructions were easy and clear, took about 10 min to put together.
Seems to be quality pipe, strong stable build even at just hand tight. When I put the desk top on it was already level so bonus there.
This kit is a great value, before I found the M desk I was looking on Pinterest for pipe leg designs thinking a trip to the hardware store and I could make it for cheaper, which was not the case. I 100% will recommend, and will purchase again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo.
Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side).
I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure.
The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried.
I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable.
The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's.
Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020