soil moisture sensor meter Hunter Soil-Clik Soil Moisture Sensor

soil moisture sensor meter Hunter Soil-Clik Soil Moisture SensorThe Hunter SoilClik is a wired soil moisture sensor kit that prevents overwatering by measuring moisture in the root zone and turning off irrigation when preset levels are reached. The system includes a weatherresistant electronic module and a directburial probe with longreach cable for flexible placement in lawns, planting beds, and landscape zones. Reliable moisture control: Pushbutton adjustments let you set the exact soil moisture level; the

The Hunter Soil‑Clik is a wired soil moisture sensor kit that prevents overwatering by measuring moisture in the root zone and turning off irrigation when preset levels are reached. The system includes a weather‑resistant electronic module and a direct‑burial probe with long‑reach cable for flexible placement in lawns, planting beds, and landscape zones.

• Reliable moisture control: Push‑button adjustments let you set the exact soil moisture level; the module provides an immediate status update and one‑touch override for special conditions.
• Wide compatibility: Connects to Hunter controllers with sensor inputs (Pro‑C, X‑Core, I‑Core, ACC) and can interrupt the common wire on most 24 VAC irrigation systems.
• Long cable reach: Probe wire supports up to 300 m (≈1,000 ft) from the module in AC installations; module should be within 2 m (≈6 ft) of the controller.
• Simple power and output: Operates from 24 VAC with a 100 mA maximum draw and provides a normally‑closed dry contact closure for reliable valve interruption.
• Durable design: NEMA 3R outdoor enclosure, direct‑burial 18 AWG probe wire, and probe rated for freezing conditions (will not operate while frozen).
• What you get: Soil‑Clik electronic module, direct‑burial probe with wire, wiring leads and installation documentation; backed by Hunter’s 5‑year warranty.

Ideal for contractors and homeowners who want dependable, low‑maintenance soil sensing that saves water and protects plants. Install the probe at the root depth for target plant material, place the module near the controller, and follow the included wiring diagrams and owner’s manual for correct setup and programming.